We now accept the following payment options:

18 Item(s) Page:
  1. 1
  2. 2
  3. Next
Show per page
Drive Shaft
Drive Shaft
$250.00

Xtreme heavy duty drive shafts for Samurais and Toyotas, They are made with 1310 Spicer Joints and have 7in of heavy duty splines. The joints will also take extreme angles 40 degrees of flex. I can have them made any length and with 12mm or 14mm bolt pattern for the samurais and I can also have Toyota patterns added to it.
Learn More


Drive Shaft
Drive Shaft
$250.00

Xtreme heavy duty drive shafts for Samurais and Toyotas, They are made with 1310 Spicer Joints and have 7in of heavy duty splines. The joints will also take extreme angles 40 degrees of flex. I can have them made any length and with 12mm or 14mm bolt pattern for the samurais and I can also have Toyota patterns added to it.
Learn More


Drive Shaft
Drive Shaft
$250.00

Xtreme heavy duty drive shafts for Samurais and Toyotas, They are made with 1310 Spicer Joints and have 7in of heavy duty splines. The joints will also take extreme angles 40 degrees of flex. I can have them made any length and with 12mm or 14mm bolt pattern for the samurais and I can also have Toyota patterns added to it.
Learn More


Drive Shaft Adapters (Rat Adapters)
Drive Shaft Adapters (Rat Adapters)
$95.00

Adapt your 1979-1985 86-88 IFS Toy 4cylinder CV and non CV driveshafts to any 1986 and newer Samurai or Sidekick T-case flange. Adapters are CNC machined 1020CR to fit Factory spec. Hardware kit included. Adapters are made to be Bore Centric, not Bolt Centric to elimate vibrations from being mounted out of round. Each adapter has the samurai snout turned onto its face and has the Toyota Bore turned into the opposite side. Adapters sold in PR's
Learn More


Hight Clearance Tranny Mount
Hight Clearance Tranny Mount
$100.00

Hi-Clearance X-member. 100% bolt in and ready to install. No more Driveline binding and destroyed output shafts Bushings Not included.
Learn More


Longfield Rear Axle Shafts
Longfield Rear Axle Shafts
$260.00

Big tires and low crawler gears can and do lead to broken rear axles. If you are looking to upgrade your drivetrain, these axle shafts are the perfect solution. The Longfield Rear Axle Shafts are made out of 4340 Chromoly and are built to withstand the harshest trails. This kit includes all new axle studs.
Learn More


Longfield Samurai Front Axle Kit (33 Spline kit)
Longfield Samurai Front Axle Kit (33 Spline kit)
$400.00

The Longfield™ Samurai 33-Spline Front Axle shafts are made out of 4340 chromoly steel. The Longfield™ birfields are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers. The internals of our Longfield™ birfields are made out of 4340 chromoly steel and then dual heat-treated for superior strength. The shafts have a larger diameter than stock and are upgraded to 26-splines on the differential side. The Birfield side of the axle shaft and the inner race of the Birfield have been upgraded to 33-splines to better distribute the torque loading. Using 4340 chromoly steel, dual heat-treating the internals of our birfields, and upgrading the spline count to 33-splines, this kit is now 60% stronger than stock!
Learn More


Samurai Drive Shaft Spacer Kit 1.25in (1986-1989)
Samurai Drive Shaft Spacer Kit 1.25in (1986-1989)
$30.00

Each kit contains one spacer and mounting hardware. Fits front or rear shaft. Spacers are made from 6061 T6 Aluminum.
Learn More


Samurai Drive Shaft Spacer Kit 1.25in (1990-1995)
Samurai Drive Shaft Spacer Kit 1.25in (1990-1995)
$30.00

Each kit contains one spacer and mounting hardware. Fits front or rear shaft. Spacers are made from 6061 T6 Aluminum.
Learn More


Samurai Drive Shaft Spacer Kit 1.5in (1986-1989)
Samurai Drive Shaft Spacer Kit 1.5in (1986-1989)
$30.00

Each kit contains one spacer and mounting hardware. Fits front or rear shaft. Spacers are made from 6061 T6 Aluminum.
Learn More


18 Item(s) Page:
  1. 1
  2. 2
  3. Next
Show per page