We now accept the following payment options:

140 Item(s) Show per page
“Snatch” Transfer Case Mount
“Snatch” Transfer Case Mount
$245.00

Another great product from ZOR! Gives your t-case a warm, fuzzy and secure feeling by grabbing the t-case in 17 bolt locations. Eliminates old school t-case mounts. The main cradle has 4 poly horizontal mounts. Price includes the "RIB" and the "HIP" brackets that mount directly to the OEM mounting locations. This is a "bolt in" answer to all your t-case issues. Now in continuous production. Snatch t-case mounts now come in bare steel. Super easy to install and remove once the t-case is secured in the cradle. Places the t-case in the correct position.
Learn More


1.3 Power Steering Conversion
1.3 Power Steering Conversion
$475.00

Complete conversion package to add power steering to your Samurai. No more tired arms! Subject to availability.
Learn More


1.3 Power Steering Conversion
1.3 Power Steering Conversion
$475.00

Complete conversion package to add power steering to your Samurai. No more tired arms! Subject to availability.
Learn More


1.3 Power Steering Kit
1.3 Power Steering Kit
$175.00

Complete conversion package to add power steering to your Samurai. No more tired arms! Subject to availability.
Learn More


1.6 Liter Adapter Plate
1.6 Liter Adapter Plate
$150.00

This adapter kit uses Trail Tough's original tried and proven 2-stage stud design for adapting the 1.6 engine to the Samurai. It eliminates the need for drilling or welding and makes installation of the transmission easier than ever before! Just bolt it on.
Learn More


1.6 Liter Custom Wiring Harness
1.6 Liter Custom Wiring Harness
$300.00

This kit from Trail Tough can make your 1600 engine conversion much easier when installing a Sidekick/ Tracker 160016V and 8V as well as Samurai fuel injection engine in your Samurai. Enjoy the reliability and efficiency of fuel injection! This price it with your donor harness.
Learn More


1.6 Liter Suzuki Conversion Kit
1.6 Liter Suzuki Conversion Kit
$550.00

This COMPLETE installation kit from Trail Tough is for performing a Sidekick to Samurai engine conversion using a 1989 to 1998 Suzuki Sidekick or Geo Tracker 8V or 16V 1600 engine. Includes an engine adapter kit, high pressure fuel pump, and modification of your donor harness completely color-coded labeled and ready install a well as modification of your speedometer.
Learn More


1/2/3 Inch Body Lift
1/2/3 Inch Body Lift
$119.00

This simple kit allows you to bolton 1/2/3 extra inches in just a couple of hours. Very beefy construction and easy instructions. No drilling or modification to your vehicle is required.
Learn More


2.0 Liter Suzuki Conversion
2.0 Liter Suzuki Conversion
$1,470.00

Our COMPLETE installation kit for performing a Samurai engine conversion using a 1999 to 2001 Vitara or Tracker 2.0 engine includes a custom flywheel, pilot bushing, custom full-circle motor mounts, engine adapter kit, high pressure fuel pump, custom 3-core radiator complete with hoses and a belt, high HP pusher fan, modification of your donor harness completely color-coded labeled and ready install a well as modification of your speedometer.
Learn More


3 inch Lift Shackles
3 inch Lift Shackles
$100.00

These 3in lift shackles our perfect when you just need a little more lift on your samurai. Price is for a set of 4.
Learn More


4.16.:1 Transfer Case Gears
4.16.:1 Transfer Case Gears
$425.00

4.16:1 gear set. 84% low range reduction, 12% high range reduction. A must when using larger tires. Kit NOW includes gears, all seals and gaskets, counter shaft, needle bearings, thrust washers,oring, and a new shift sheet! No cores required on gear kits!
Learn More


6.4:1 Transfer Case
6.4:1 Transfer Case
$1,000.00

Our completely rebuilt transfer case with 6.4 gears professionally installed is ready to bolt in. Includes 6.4 low gears, all new bearings, seals, gaskets, counter shaft and shift sheet. All you add is the oil. (We recommend NON-synthetic 80/90 GL5 rated gear oil). This 6.4 gear ratio is for the serious off-roader with rock crawling in mind! Provides 181% low range reduction and ONLY 17% high range reduction. These one-piece billet gears are made in Japan (not China), run QUIET, and provide superior reliability. Plus $350.00 refundable core charge
Learn More


6.4:1 Transfer Case Gears
6.4:1 Transfer Case Gears
$600.00

Low range gears are critical for technical off-road driving. Our Samurai low range gear kit is the highest quality gear set available. Low Range reduction is 6.5 to 1. High Range reduction is 20% (1.7 to 1). No welded or second rate, gears here. These are are strong, run quiet and take a huge amount of abuse. This complete kit includes four new precision cut gears, counter shaft, needle bearings, shims, o-ring, gaskets, and input/output seals. Heavy duty front output shaft recommended. Minor grinding of case is necessary for installation. Fits 1986-1995 Suzuki Samurai's.
Learn More


ABS Door Panels
ABS Door Panels
$75.00

ABS door panels for your Samurai. Door panels will fit soft or hard top Samurai You will receive a driver's side and passenger's side ABS panel and fasteners.
Learn More


Aluminum Door Handles
Aluminum Door Handles
$65.00

These replacement handles are a direct swap for those plastic stock door handles that break on you all the time. Made from cast aluminum - you wont break these. Complete set of replacement aluminum door handles for your Samurai. Inside and out. Left and right. Consists of 2 exterior handles, 2 interior handles, new mounting hardware and complete instructions. Note that this kit reuses the factory mounting rack and springs. It only replaces the handles themselves. If you are missing the factory mounting rack and springs, you can purchase the original Suzuki handles below. Note: these handles work with the Samurai (SJ413) as well as SJ410 vehicles.
Learn More


Aluminum Door Panels
Aluminum Door Panels
$100.00

These aluminum door panels are an excellent upgrade to your samurai. You can get them in diamond plate or swirl finish.
Learn More


Bikini Top
Bikini Top
$75.00

Try the Breeze-O-Top 1000 Denier Cordura Bikini Top for total sun protection and a bit more wind protection. Using the same eleven attachment point as the mesh bikini version, you get the benefit of the incredibly tough Cordura material. This is military grade stuff with a clear PVC coating on the inside so rain will not leak thru the fabric
Learn More


Bomb Proof T-Case Mount Kit
Bomb Proof T-Case Mount Kit
$36.75

Have you installed lower transfer case gears in your Samurai? Lower than stock transfer case gears can stretch and damage stock rubber and aftermarket polyurethane transfer case mounts. Our heavy duty aluminum transfer case mounts are a solid way to attach your low range case. Easy installation, just unbolt the stock ones and replace. Kit contains three spacers and mounting hardware.
Learn More


Brass Shift Sheet
Brass Shift Sheet
$25.00

Another great product from ZOR, gives your trans a nice solid shift again. This trans shifter sheet has a 25 year warranty, made of solid brass. Gives your shifter a continous solid shift and feel. The last sheet you will ever drop in your 5 speed Suzuki Samurai trans. Illustrated instructions. Comes with a new specially designed 3 point 15lb wavy washer.
Learn More


Brass Shift Sheets
Brass Shift Sheets
$15.00

This shift sheet has a 25 year warranty. Made from solid brass rod. Durable and long lasting, this is the last Transfer Case shifter sheet you'll ever have to buy! Fits all year Samurai 1986 to 1995 models. Illustrated instructions
Learn More


Clicky Starter Fix
Clicky Starter Fix
$20.00

Here's an inexpensive quick fix for an all too common Samurai problem. You hop in your rig, turn the key, and hear "CLICK". We know it's happened to you. It's happened to us. Oh sure, you've probabally just learned to live with it. Keep trying enough times and it will eventually work. But it's inconvienent and down right embarrasing sometimes. This problem is due to a design flaw in the Samurai wiring. It does not deliver enough voltage to the starter solonoid to engage the starter motor. This starter relay kit includes a 30 Amp relay, wire ties, wiring (pre-terminated for fool proof installation) and instructions. It takes literally 5 mintes to install and once there - you can kiss those annoying "clicks" goodbye forever.
Learn More


Clutch Cable
Clutch Cable
$45.00

OEM Suzuki stock replacement clutch cable. Outlasts the aftermarket type.
Learn More


Dash Clock
Dash Clock
$20.00

New Suzuki LED dashboard clock for Suzuki Samurai. Designed to fit all early model years (with round vents on the dash)
Learn More


Deluxe Spring Over-TrailTough
Deluxe Spring Over-TrailTough
$833.00

This is the suspension system to get when you want to do your spring over job RIGHT for first time! 4 1/2" of lift for up to 31" tires. Kit includes: Knuckle Over Steering Urethane bushings Extended brake lines 2 sets Heavy Duty Shackles 2 one inch driveline spacers Front and rear lower shock mounts 2 pair adjustable spring perches 4 Doetsch Tech shocks
Learn More


Differential Guards
Differential Guards
$60.00

Our differential guards use thick steel plate for the base ring. This helps spread the load of any impact over the surface of the differential. The armor structure is a very beefy cold rolled round stock for the hoops and bars. Solid round stock is used to take away the chance of the tube collapsing or crushing. Each guard is jig welded for precise fitment every time and clamped for the cooling procedure to help ensure a good straight girdle. All welds are cleaned and sharp spots are buffed off to leave a clean and smooth product. They are shipped with a glossy black finish for a great look when installed.
Learn More


Door Glass Weather Stripping
Door Glass Weather Stripping
$25.00

New rubber seal for the door glass on your Suzuki Samurai. These are genuine Suzuki rubber with a felt coating on the weatherstrip for a perfect fit around your window.
Learn More


Double Tough Gen V Axles
Double Tough Gen V Axles
$345.00

"Double Tough Gen V" axles are the STRONGEST Samurai SJ413 front axles we have ever had! They are 26 spline, 4340 Chrome moly, and feature much stronger rolled splines (instead of cut splines) and Mikronite finish. We recommend these axles for up to 35" tires.
Learn More


Drive Shaft Adapters (Rat Adapters)
Drive Shaft Adapters (Rat Adapters)
$95.00

Adapt your 1979-1985 86-88 IFS Toy 4cylinder CV and non CV driveshafts to any 1986 and newer Samurai or Sidekick T-case flange. Adapters are CNC machined 1020CR to fit Factory spec. Hardware kit included. Adapters are made to be Bore Centric, not Bolt Centric to elimate vibrations from being mounted out of round. Each adapter has the samurai snout turned onto its face and has the Toyota Bore turned into the opposite side. Adapters sold in PR's
Learn More


Drop Pitman Arm
Drop Pitman Arm
$130.00

Suzuki Samurai 3" drop pitman arm provides steering correction on small lifts.
Learn More


Fast Back Bikini Top
Fast Back Bikini Top
$80.00

Need something in between? Our brand new Fastback Bikini Top will fit the bill perfectly! Works like the regular Bikini Top but with a little extra protection behind your head. Why is this so important? You will notice less wind backdraft and less trail dust coming back into the cab area. How about a little rain, no problem, everything is waterproof. Made from our standard military grade 1000 denier Cordur fabric, with a clear PVC coating on the inside. Features all steel hardware, no cheap plastic buckles on this one.
Learn More


Front End Rebuild Kit
Front End Rebuild Kit
$175.00

This complete kit includes all wheel bearings, kingpin bearings, seals, and gaskets to rebuild BOTH sides of your front axle housing
Learn More


full size top
full size top
$160.00

Our 1000 Denier Cordura Safari Top has it all! This super tough Cordura top goes all the way back to the rear stock tension hoop for the ultimate in fun and function. Your rear passengers or cargo will have much more protection than the Bikini or Safari Mesh top. This top also has a clear PVC coating to prevent any rain or water seepage. More than enough straps, buckles and stainless steel locks to keep everything tight and in place. Use the side grommet holes for an even more secure top.
Learn More


Fully Built Rock Assault™ Samurai Rear Axle with 4cyl 5.29 ARB differential
Fully Built Rock Assault™ Samurai Rear Axle with 4cyl 5.29 ARB differential
$2,878.44

In response to overwhelming demand, Trail-Gear is now offering fully built rear axles! These feature our world renowned Rock Assault™ Axle Housings, our complete Rear Disc Brake Kit, Chromoly Axle Shafts, Bearing Pockets, Rear Axle Bearing Service Kit and all the necessary nuts and studs, all fully assembled by our Master Mechanics according to your specifications! Rock Assault™ Rear Axle Housings provide unparalleled strength due to the 5/16” thick, high strength DOM axle tubes that engage 5/8” further into the center section and the 360° gusset welded around the tubes on the inside of the housing. The Trail-Gear Rock Assault™ Axle Housings also feature axle tubes that have been offset above the housing centerline to allow the inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The heavy-duty, press formed, 1/4" plate steel center section shell is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from ½” plate steel to ensure studs cannot pull out, even under heavy loads. The outer offset flanges are made from 4130 Chromoly to prevent distortion or bending. Housings are precision aligned using start-of-the-art, 3D digital imaging equipment. Fully Built Rock Assault™ Rear Axle Housing Made entirely of brand new parts, these axles feature everything you need hub-to hub! This is a fully assembled rear axle made entirely of brand new, upgraded components, not refurbished junkyard parts. You choose the Axle Width and desired differential and we do all the assembly. All you’ll need to do is weld on your perches, install it on your vehicle, add the wheels and Rock the Trail! Save the time, money and hassle of ordering each component separately and building it yourself. We’ve already taken care of it! Customize each axle to exactly what you need with your choice of: Axle Width Differential ***Please note these fully built axles are for Leaf Spring applications only. No other bracketry should be welded onto assembled axles. If you are interested in purchasing this kit for 3-link or 4-link applications, we can send all components for your assembly. Please contact our Sales staff with any questions.
Learn More


Fully Built Rock Assault™ Samurai Rear Axle with 4cyl 5.29 detroit differential
Fully Built Rock Assault™ Samurai Rear Axle with 4cyl 5.29 detroit differential
$2,451.64

In response to overwhelming demand, Trail-Gear is now offering fully built rear axles! These feature our world renowned Rock Assault™ Axle Housings, our complete Rear Disc Brake Kit, Chromoly Axle Shafts, Bearing Pockets, Rear Axle Bearing Service Kit and all the necessary nuts and studs, all fully assembled by our Master Mechanics according to your specifications! Rock Assault™ Rear Axle Housings provide unparalleled strength due to the 5/16” thick, high strength DOM axle tubes that engage 5/8” further into the center section and the 360° gusset welded around the tubes on the inside of the housing. The Trail-Gear Rock Assault™ Axle Housings also feature axle tubes that have been offset above the housing centerline to allow the inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The heavy-duty, press formed, 1/4" plate steel center section shell is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from ½” plate steel to ensure studs cannot pull out, even under heavy loads. The outer offset flanges are made from 4130 Chromoly to prevent distortion or bending. Housings are precision aligned using start-of-the-art, 3D digital imaging equipment. Fully Built Rock Assault™ Rear Axle Housing Made entirely of brand new parts, these axles feature everything you need hub-to hub! This is a fully assembled rear axle made entirely of brand new, upgraded components, not refurbished junkyard parts. You choose the Axle Width and desired differential and we do all the assembly. All you’ll need to do is weld on your perches, install it on your vehicle, add the wheels and Rock the Trail! Save the time, money and hassle of ordering each component separately and building it yourself. We’ve already taken care of it! Customize each axle to exactly what you need with your choice of: Axle Width Differential ***Please note these fully built axles are for Leaf Spring applications only. No other bracketry should be welded onto assembled axles. If you are interested in purchasing this kit for 3-link or 4-link applications, we can send all components for your assembly. Please contact our Sales staff with any questions.
Learn More


Fully Built Rock Assault™ Samurai Rear Axle with 4cyl, 4.88, spool differential
Fully Built Rock Assault™ Samurai Rear Axle with 4cyl, 4.88, spool differential
$2,023.74

In response to overwhelming demand, Trail-Gear is now offering fully built rear axles! These feature our world renowned Rock Assault™ Axle Housings, our complete Rear Disc Brake Kit, Chromoly Axle Shafts, Bearing Pockets, Rear Axle Bearing Service Kit and all the necessary nuts and studs, all fully assembled by our Master Mechanics according to your specifications! Rock Assault™ Rear Axle Housings provide unparalleled strength due to the 5/16” thick, high strength DOM axle tubes that engage 5/8” further into the center section and the 360° gusset welded around the tubes on the inside of the housing. The Trail-Gear Rock Assault™ Axle Housings also feature axle tubes that have been offset above the housing centerline to allow the inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The heavy-duty, press formed, 1/4" plate steel center section shell is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from ½” plate steel to ensure studs cannot pull out, even under heavy loads. The outer offset flanges are made from 4130 Chromoly to prevent distortion or bending. Housings are precision aligned using start-of-the-art, 3D digital imaging equipment. Fully Built Rock Assault™ Rear Axle Housing Made entirely of brand new parts, these axles feature everything you need hub-to hub! This is a fully assembled rear axle made entirely of brand new, upgraded components, not refurbished junkyard parts. You choose the Axle Width and desired differential and we do all the assembly. All you’ll need to do is weld on your perches, install it on your vehicle, add the wheels and Rock the Trail! Save the time, money and hassle of ordering each component separately and building it yourself. We’ve already taken care of it! Customize each axle to exactly what you need with your choice of: Axle Width Differential ***Please note these fully built axles are for Leaf Spring applications only. No other bracketry should be welded onto assembled axles. If you are interested in purchasing this kit for 3-link or 4-link applications, we can send all components for your assembly. Please contact our Sales staff with any questions.
Learn More


Fully Built Rock Assault™ Samurai Rear Axle with V6 4.88 detroit differential
Fully Built Rock Assault™ Samurai Rear Axle with V6 4.88 detroit differential
$2,751.94

In response to overwhelming demand, Trail-Gear is now offering fully built rear axles! These feature our world renowned Rock Assault™ Axle Housings, our complete Rear Disc Brake Kit, Chromoly Axle Shafts, Bearing Pockets, Rear Axle Bearing Service Kit and all the necessary nuts and studs, all fully assembled by our Master Mechanics according to your specifications! Rock Assault™ Rear Axle Housings provide unparalleled strength due to the 5/16” thick, high strength DOM axle tubes that engage 5/8” further into the center section and the 360° gusset welded around the tubes on the inside of the housing. The Trail-Gear Rock Assault™ Axle Housings also feature axle tubes that have been offset above the housing centerline to allow the inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The heavy-duty, press formed, 1/4" plate steel center section shell is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from ½” plate steel to ensure studs cannot pull out, even under heavy loads. The outer offset flanges are made from 4130 Chromoly to prevent distortion or bending. Housings are precision aligned using start-of-the-art, 3D digital imaging equipment. Fully Built Rock Assault™ Rear Axle Housing Made entirely of brand new parts, these axles feature everything you need hub-to hub! This is a fully assembled rear axle made entirely of brand new, upgraded components, not refurbished junkyard parts. You choose the Axle Width and desired differential and we do all the assembly. All you’ll need to do is weld on your perches, install it on your vehicle, add the wheels and Rock the Trail! Save the time, money and hassle of ordering each component separately and building it yourself. We’ve already taken care of it! Customize each axle to exactly what you need with your choice of: Axle Width Differential ***Please note these fully built axles are for Leaf Spring applications only. No other bracketry should be welded onto assembled axles. If you are interested in purchasing this kit for 3-link or 4-link applications, we can send all components for your assembly. Please contact our Sales staff with any questions.
Learn More


Fully Built Rock Assault™ Samurai Rear Axle with V6 5.29 ARB differential
Fully Built Rock Assault™ Samurai Rear Axle with V6 5.29 ARB differential
$2,993.94

In response to overwhelming demand, Trail-Gear is now offering fully built rear axles! These feature our world renowned Rock Assault™ Axle Housings, our complete Rear Disc Brake Kit, Chromoly Axle Shafts, Bearing Pockets, Rear Axle Bearing Service Kit and all the necessary nuts and studs, all fully assembled by our Master Mechanics according to your specifications! Rock Assault™ Rear Axle Housings provide unparalleled strength due to the 5/16” thick, high strength DOM axle tubes that engage 5/8” further into the center section and the 360° gusset welded around the tubes on the inside of the housing. The Trail-Gear Rock Assault™ Axle Housings also feature axle tubes that have been offset above the housing centerline to allow the inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The heavy-duty, press formed, 1/4" plate steel center section shell is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from ½” plate steel to ensure studs cannot pull out, even under heavy loads. The outer offset flanges are made from 4130 Chromoly to prevent distortion or bending. Housings are precision aligned using start-of-the-art, 3D digital imaging equipment. Fully Built Rock Assault™ Rear Axle Housing Made entirely of brand new parts, these axles feature everything you need hub-to hub! This is a fully assembled rear axle made entirely of brand new, upgraded components, not refurbished junkyard parts. You choose the Axle Width and desired differential and we do all the assembly. All you’ll need to do is weld on your perches, install it on your vehicle, add the wheels and Rock the Trail! Save the time, money and hassle of ordering each component separately and building it yourself. We’ve already taken care of it! Customize each axle to exactly what you need with your choice of: Axle Width Differential ***Please note these fully built axles are for Leaf Spring applications only. No other bracketry should be welded onto assembled axles. If you are interested in purchasing this kit for 3-link or 4-link applications, we can send all components for your assembly. Please contact our Sales staff with any questions.
Learn More


Fully Built Rock Assault™ Samurai Rear Axle with V6 5.29 detroit differential
Fully Built Rock Assault™ Samurai Rear Axle with V6 5.29 detroit differential
$2,751.94

In response to overwhelming demand, Trail-Gear is now offering fully built rear axles! These feature our world renowned Rock Assault™ Axle Housings, our complete Rear Disc Brake Kit, Chromoly Axle Shafts, Bearing Pockets, Rear Axle Bearing Service Kit and all the necessary nuts and studs, all fully assembled by our Master Mechanics according to your specifications! Rock Assault™ Rear Axle Housings provide unparalleled strength due to the 5/16” thick, high strength DOM axle tubes that engage 5/8” further into the center section and the 360° gusset welded around the tubes on the inside of the housing. The Trail-Gear Rock Assault™ Axle Housings also feature axle tubes that have been offset above the housing centerline to allow the inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The heavy-duty, press formed, 1/4" plate steel center section shell is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from ½” plate steel to ensure studs cannot pull out, even under heavy loads. The outer offset flanges are made from 4130 Chromoly to prevent distortion or bending. Housings are precision aligned using start-of-the-art, 3D digital imaging equipment. Fully Built Rock Assault™ Rear Axle Housing Made entirely of brand new parts, these axles feature everything you need hub-to hub! This is a fully assembled rear axle made entirely of brand new, upgraded components, not refurbished junkyard parts. You choose the Axle Width and desired differential and we do all the assembly. All you’ll need to do is weld on your perches, install it on your vehicle, add the wheels and Rock the Trail! Save the time, money and hassle of ordering each component separately and building it yourself. We’ve already taken care of it! Customize each axle to exactly what you need with your choice of: Axle Width Differential ***Please note these fully built axles are for Leaf Spring applications only. No other bracketry should be welded onto assembled axles. If you are interested in purchasing this kit for 3-link or 4-link applications, we can send all components for your assembly. Please contact our Sales staff with any questions.
Learn More


Fully Built Rock Assault™ Samurai Rear Axle with V6 5.29 spool differential
Fully Built Rock Assault™ Samurai Rear Axle with V6 5.29 spool differential
$2,266.84

In response to overwhelming demand, Trail-Gear is now offering fully built rear axles! These feature our world renowned Rock Assault™ Axle Housings, our complete Rear Disc Brake Kit, Chromoly Axle Shafts, Bearing Pockets, Rear Axle Bearing Service Kit and all the necessary nuts and studs, all fully assembled by our Master Mechanics according to your specifications! Rock Assault™ Rear Axle Housings provide unparalleled strength due to the 5/16” thick, high strength DOM axle tubes that engage 5/8” further into the center section and the 360° gusset welded around the tubes on the inside of the housing. The Trail-Gear Rock Assault™ Axle Housings also feature axle tubes that have been offset above the housing centerline to allow the inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The heavy-duty, press formed, 1/4" plate steel center section shell is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from ½” plate steel to ensure studs cannot pull out, even under heavy loads. The outer offset flanges are made from 4130 Chromoly to prevent distortion or bending. Housings are precision aligned using start-of-the-art, 3D digital imaging equipment. Fully Built Rock Assault™ Rear Axle Housing Made entirely of brand new parts, these axles feature everything you need hub-to hub! This is a fully assembled rear axle made entirely of brand new, upgraded components, not refurbished junkyard parts. You choose the Axle Width and desired differential and we do all the assembly. All you’ll need to do is weld on your perches, install it on your vehicle, add the wheels and Rock the Trail! Save the time, money and hassle of ordering each component separately and building it yourself. We’ve already taken care of it! Customize each axle to exactly what you need with your choice of: Axle Width Differential ***Please note these fully built axles are for Leaf Spring applications only. No other bracketry should be welded onto assembled axles. If you are interested in purchasing this kit for 3-link or 4-link applications, we can send all components for your assembly. Please contact our Sales staff with any questions.
Learn More


Fully Built Rock Assault™ Samurai Rear Axle with V6, 4.88, spool differential
Fully Built Rock Assault™ Samurai Rear Axle with V6, 4.88, spool differential
$2,266.84

In response to overwhelming demand, Trail-Gear is now offering fully built rear axles! These feature our world renowned Rock Assault™ Axle Housings, our complete Rear Disc Brake Kit, Chromoly Axle Shafts, Bearing Pockets, Rear Axle Bearing Service Kit and all the necessary nuts and studs, all fully assembled by our Master Mechanics according to your specifications! Rock Assault™ Rear Axle Housings provide unparalleled strength due to the 5/16” thick, high strength DOM axle tubes that engage 5/8” further into the center section and the 360° gusset welded around the tubes on the inside of the housing. The Trail-Gear Rock Assault™ Axle Housings also feature axle tubes that have been offset above the housing centerline to allow the inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The heavy-duty, press formed, 1/4" plate steel center section shell is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from ½” plate steel to ensure studs cannot pull out, even under heavy loads. The outer offset flanges are made from 4130 Chromoly to prevent distortion or bending. Housings are precision aligned using start-of-the-art, 3D digital imaging equipment. Fully Built Rock Assault™ Rear Axle Housing Made entirely of brand new parts, these axles feature everything you need hub-to hub! This is a fully assembled rear axle made entirely of brand new, upgraded components, not refurbished junkyard parts. You choose the Axle Width and desired differential and we do all the assembly. All you’ll need to do is weld on your perches, install it on your vehicle, add the wheels and Rock the Trail! Save the time, money and hassle of ordering each component separately and building it yourself. We’ve already taken care of it! Customize each axle to exactly what you need with your choice of: Axle Width Differential ***Please note these fully built axles are for Leaf Spring applications only. No other bracketry should be welded onto assembled axles. If you are interested in purchasing this kit for 3-link or 4-link applications, we can send all components for your assembly. Please contact our Sales staff with any questions.
Learn More


Gas Tank Sending Unit
Gas Tank Sending Unit
$25.00

Chances are, your Suzuki Samurai gas guage has not been working for a while now. We know what you are doing. You reset the trip odometer and just know how many miles you can drive before needing gas. This works fine until your kid thinks "I wonder what pressing this botton will do?". Most of the time, the problem is the fuel sending unit in your gas tank. Suzuki wants $40 for this part. We've got the complete assembly (including new gasket) for under $20. It's time you fixed this problem. Get your gas guage working like it should and use your trip odomenter for something else (like, say, umm....keeping tract of milage used on your trip?)
Learn More


Gas Tank Skid Plate
Gas Tank Skid Plate
$140.00

The Hardcore gas tank skid plate is constructed from beefy 3/16" steel. It covers the gas tank entirely front to rear and an access hole is retained just like the stock skid. This heavy duty skidplate is truly a quality piece of work. Each skidplate weighs in at an incredible 30lbs, so you know you're getting something that can never be damaged. All skidplates come powdercoated black. Photo model shows yellow for an easy high contrast view.
Learn More


gm alternator
gm alternator
$250.00

THIS IS A COMPLETE NEW NOT REMANUFACTURED CS130 105AMP THREE WIRE ALTERNATOR CONVERSION KIT. THIS CONVERSION KIT WILL REPLACE YOUR STOCK 40-55AMP " THREE WIRE " ALTERNATOR. FOR THIS CS130 105-AMP GM ALTERNATOR.
Learn More


GM Alternator Kit
GM Alternator Kit
$150.00

Here's the complete GM Alternator kit! Includes 78 amp GM style alternator (that's over twice the output of a stock Samurai alternator), the alternator bracket, wiring, new fan belt and complete illustrated instructions.
Learn More


Header 1.3/1.6 8v
Header 1.3/1.6 8v
$225.00

Now, more than ever, the absolute best quality header made for the Samurai. This is the last header you will ever need to buy! Our brand new T.I.G. welded fully stainless exhaust header is designed for long-term heavy use. We use a THICK 3/8" head flange that eliminates warping and leaks. It's also port matched to work on the Suzuki's rectangular exhaust port. Other headers use a round port. What does that match? The header also features a 02 sensor port at the 3-bolt flange. This header adds horsepower and increases fuel economy. Installation of this kit is fast and easy with complete hardware and detailed instructions included. A great performance value for your dollar. Complete kit includes header, upper flange gasket, collector kit, lower flange gasket, hardware and installation instructions.
Learn More


Hight Clearance Tranny Mount
Hight Clearance Tranny Mount
$100.00

Hi-Clearance X-member. 100% bolt in and ready to install. No more Driveline binding and destroyed output shafts Bushings Not included.
Learn More


Hood Release Cable
Hood Release Cable
$275.00

Aluminum Dash will allow you to install gauges, switches, radios and other controls that cannot be installed in the stock dash and give you a great custom appearance. They don’t get any easier to clean then this. Our dash uses the original mounts on the body but allow for a custom look and installation. Individual panels make it easy to cut the holes for your gauges. The aluminum dash is supplied with the nuts installed in the dash to make assembly and removal of the panels very easy. Stainless steel screws are included to attach the panels. Additional panels are available on request. Right hand drive available.
Learn More


Hood Release Cable
Hood Release Cable
$25.00

OEM Replacement Hood Release Cable
Learn More


Isky Torquer Cam
Isky Torquer Cam
$190.00

This is a custom cam from Isky built just for Xtreme Zuks Offroad the cam is not a regrind cam and it performs off idle to 3500 rpm.
Learn More


Lockrite Locker
Lockrite Locker
$209.00

Tractech's locking differentials keep the wheels locked together when ever torque is applied so that together the left and right wheels always deliver maximum traction to the ground; neither wheel can spin out. ***FREE installation of locker when you buy both locker and 3rd member from us****
Learn More


Mighty Kong Mount/Skid Plate
Mighty Kong Mount/Skid Plate
$189.00

"Mighty Kong" combination t-case mount / skid plate. This extreme-duty unitized design will not flex or distort and actually adds strength to your case. It provides protection where you need it - not where you don't and weighs only 12 lbs.
Learn More


Mini Spool
Mini Spool
$109.00

It's FINALLY here! A TRUE mini-spool for the Samurai AND the Sidekick! The spool is an extremely strong and economical method of achieving 100% lock up of the rear differential without the quirkiness associated with automatic lockers. It is manufactured from SAE 8620 alloy bar stock material and is heat treated for superior strength.
Learn More


Motor Mounts
Motor Mounts
$35.00

These motor mounts are a major uprgrade when installing a new engine or a 1.6, they might look like a stock motor mount but the rubber and the cup are built in so there is no movement in the motor mount.
Learn More


Oem Glove Box Door
Oem Glove Box Door
$26.00

OEM Replacement Glove Box Doors. 86-88.5 (round vents in dash) $26.00 88.5 + (square vents in dash) $35.00
Learn More


Polycarbonate Windshields
Polycarbonate Windshields
$160.00

If you're driving offroad alot - you are either squinting to see through a spider webbed front windshield or you are dumping hard earned money into replacing your glass over and over. Stop the insanity! Polycarbonate windshields for the Suzuki Samurai. Half the wieght and over 250% stronger than glass. Will not crack or spider like glass. Complete with anti scratch coating and includes new rubber seal.
Learn More


Radio Antenna
Radio Antenna
$17.00

New replacement radio antenna for Suzuki Samurai vehicles.
Learn More


Rag Joint Eliminator
Rag Joint Eliminator
$65.00

Replace your worn out rag joint with our heavy duty rag joint eliminator.
Learn More


Rear Disk Brake
Rear Disk Brake
$200.00

Converts your old and weak drum style brakes into a modern, stronger, safer disc brake system. As described below, the Disc Brake Kit comes with everything you need except the braking setup (you also supply your own front calipers and rotors). The Disc Brake Kit by itself is intended for those who want disc brakes but wish to make their own brake lines. This is not complex, but you do have to have the correct flaring tool, the steel lines, and the threaded ends. If you do not wish to make up your own brake line connrections, we do offer the optional brake. This optional kit makes your installation a safe and very easy one. NO WELDING will be required for any of our disc brake items, it is a full bolton system. Items included in Disc Brake kit: -High quality machined aluminum caliper mounts. -Steel adapter plates to go from the 4 bolt pattern on the axle to the five bolt pattern on the wheel and rotor. -Grade 8 bolts with matching nylocks and washers. -Grade 5 mounting bolts for caliper. -New OEM Wheel Studs.
Learn More


Rear Seat Latch
Rear Seat Latch
$30.00

Rear Seat Latch Plate Suzuki OEM part.
Learn More


Rear Tail Lights
Rear Tail Lights
$40.00

Complete rear taillight assembly for all years Suzuki Samurai. Specify left or right when ordering.
Learn More


Rear Wheel Bearing Kit
Rear Wheel Bearing Kit
$45.00

Top quality bearings for long life. Includes bearing, shim, retainer, and seal. One kit does one side.
Learn More


Remanufactured Transfer Case
Remanufactured Transfer Case
$450.00

These Samurai t-cases have been completely gone through with new gaskets and seals. Bad bearings are replaced with good used bearings. Worn shift collars or forks replaced with used parts that are within tolerances. Includes a T-BRA brass shifter sheet. Shipped without flanges and no oil! A $250 Core Deposit is reguired and is fully refundable upon our recieving your rebuildable T-case. Broken housings or unusable mainshafts will not get a full refund on the core deposit. One year warranty on our rebuilds. Warranty covers ALL parts except the two case halfs.
Learn More


Samurai 26 Spline Spool Locker
Samurai 26 Spline Spool Locker
$99.00

Trail-Gear Mini Spools fit 86-95 Suzuki Samurai and 89-00 Sidekick rear applications and can also be installed into a front differential with the 26 spline spider gear upgrade. The TG mini spool installs into a standard 26 spline rear open carrier with no additional parts required and offers you the same traction as a full spool at a fraction of the cost.
Learn More


Samurai 6.5 Transfer Case Gear Set
Samurai 6.5 Transfer Case Gear Set
$599.00

Low range gears are critical for technical off-road driving. Our Samurai low range gear kit is the highest quality gear set available. Low Range reduction is 6.5 to 1. High Range reduction is 20% (1.7 to 1). No welded or second rate, gears here. These are strong, run quiet and take a huge amount of abuse. This complete kit includes four new precision cut gears, counter shaft, needle bearings, shims, o-ring, gaskets, and input/output seals. Heavy duty front output shaft recommended (see below). Minor grinding of case is necessary for installation. Fits 1986-1995 Suzuki Samurai's.
Learn More


Samurai Brake Line Extension Kit 86-88.5
Samurai Brake Line Extension Kit 86-88.5
$68.26

When doing a spring over conversion to your Samurai or when installing a lift, longer than stock brake lines are needed. Trail-Gear is proud to offer our DOT approved 21" extended brake line kits. All necessary mounting hardware is included, and kits are sold complete for your application. 86-88.5 Samurais use two brake lines in the front and two brake lines in the rear, while later model 88.5-95 Samurais use two brake lines in the front and only one brake line in the rear. If you have an 88 Samurai you will need to look and see if you have one or two brake lines in the rear before placing your order.
Learn More


Samurai Brake Line Extension Kit 88.5-95
Samurai Brake Line Extension Kit 88.5-95
$68.25

When doing a spring over conversion to your Samurai or when installing a lift, longer than stock brake lines are needed. Trail-Gear is proud to offer our DOT approved 21" extended brake line kits. All necessary mounting hardware is included, and kits are sold complete for your application. 86-88.5 Samurais use two brake lines in the front and two brake lines in the rear, while later model 88.5-95 Samurais use two brake lines in the front and only one brake line in the rear. If you have an 88 Samurai you will need to look and see if you have one or two brake lines in the rear before placing your order.
Learn More


Samurai Brake Rotors
Samurai Brake Rotors
$23.10

Stock replacement rotors for the front of your 1986-1995 Samurai.
Learn More


Samurai Drive Shaft Spacer Kit 1.25in (1986-1989)
Samurai Drive Shaft Spacer Kit 1.25in (1986-1989)
$30.00

Each kit contains one spacer and mounting hardware. Fits front or rear shaft. Spacers are made from 6061 T6 Aluminum.
Learn More


Samurai Drive Shaft Spacer Kit 1.25in (1990-1995)
Samurai Drive Shaft Spacer Kit 1.25in (1990-1995)
$30.00

Each kit contains one spacer and mounting hardware. Fits front or rear shaft. Spacers are made from 6061 T6 Aluminum.
Learn More


Samurai Drive Shaft Spacer Kit 1.5in (1986-1989)
Samurai Drive Shaft Spacer Kit 1.5in (1986-1989)
$30.00

Each kit contains one spacer and mounting hardware. Fits front or rear shaft. Spacers are made from 6061 T6 Aluminum.
Learn More


Samurai Drive Shaft Spacer Kit 1.5in (1990-1995)
Samurai Drive Shaft Spacer Kit 1.5in (1990-1995)
$30.00

Each kit contains one spacer and mounting hardware. Fits front or rear shaft. Spacers are made from 6061 T6 Aluminum.
Learn More


Samurai Drive Shaft Spacer Kit 1in (1986-1989)
Samurai Drive Shaft Spacer Kit 1in (1986-1989)
$30.00

Each kit contains one spacer and mounting hardware. Fits front or rear shaft. Spacers are made from 6061 T6 Aluminum.
Learn More


Samurai Drive Shaft Spacer Kit 1in (1990-1995)
Samurai Drive Shaft Spacer Kit 1in (1990-1995)
$30.00

Each kit contains one spacer and mounting hardware. Fits front or rear shaft. Spacers are made from 6061 T6 Aluminum.
Learn More


Samurai Drive Shaft Spacer Kit 3/4in (1986-1989)
Samurai Drive Shaft Spacer Kit 3/4in (1986-1989)
$30.00

Each kit contains one spacer and mounting hardware. Fits front or rear shaft. Spacers are made from 6061 T6 Aluminum.
Learn More


Samurai Drive Shaft Spacer Kit 3/4in (1990-1995)
Samurai Drive Shaft Spacer Kit 3/4in (1990-1995)
$30.00

Each kit contains one spacer and mounting hardware. Fits front or rear shaft. Spacers are made from 6061 T6 Aluminum.
Learn More


Samurai Factory Rubber Transfer Case Mount
Samurai Factory Rubber Transfer Case Mount
$36.75

Old worn out mounts can fail at the worst time on the trail. If your showing signs of stress damage or wear, now is the time to replace them. It's also a great idea to keep one or two as spares in your tool box.
Learn More


Samurai Front Axle Service Kit
Samurai Front Axle Service Kit
$208.95

Kit includes all the parts you need to rebuild your front axle. Includes inner axle seals, bearing seals, wheel bearings, knuckle bearings, backing plates, and star washers. Includes parts for both left and right sides. One kit covers both sides. Fits 1986-1995 Samurai.
Learn More


Samurai Front Brake Pads 1986-1993
Samurai Front Brake Pads 1986-1993
$23.10

When it comes to safety and brakes, we don't fool around. You need safe brakes, but why spend lots of money to get them? Trail-Gear offers our high quality semi- metallic brake pads at a great low price.
Learn More


Samurai Front Brake Pads 1994-1995
Samurai Front Brake Pads 1994-1995
$23.10

When it comes to safety and brakes, we don't fool around. You need safe brakes, but why spend lots of money to get them? Trail-Gear offers our high quality semi- metallic brake pads at a great low price.
Learn More


Samurai Heavy Duty Transfer Case Front Output Shaft
Samurai Heavy Duty Transfer Case Front Output Shaft
$99.00

Putting in lower transfer case gears and really getting on the throttle can sometimes damage the front output shaft. This results in a loud popping noise under load and is detrimental to the life of the output shaft. Repeated popping of the front output shaft gear will result in gear failure and loss of power to the front axle. In 1993 Suzuki upgraded the output shaft and stopped using the older style shaft that was prone to failure. These later style shafts are a drop in replacement for 1986-1989 transfer cases. This upgrade is especially good for transfer cases that have lower than stock gearing in them because the lower the gear, the higher the toque load going through the gear. The front output gear can be installed without full disassembly of the transfer case. Only the front output cover needs to be removed to install this gear. Replace your older gear now and keep it in your tool box as a trail spare. Fits 1986-1995 Suzuki Samurai's.
Learn More


Samurai High Steer Kit
Samurai High Steer Kit
$299.00

The Trail-Gear Samurai High Steer kit has been engineered specifically to work with stock Samurai axles. This complete kit features solid forged 8620 steel steering arms, heavy duty 1 ¼” x .250” wall DOM Drag Link and Tie Rod, FJ80 tie rod ends and all necessary hardware. This kit even includes the hard-to-find 1:10 taper reamer for reaming out your stock Pitman arm! The Trail-Gear Samurai High Steer kit has been designed for easy installation. It is a must-have for a spring over axle set-up!
Learn More


Samurai Inner Axle Seal
Samurai Inner Axle Seal
$6.30

Looking for just the inner axle seal by itself without purchasing the entire kit? We have them right here. Fits 1986-1995 Samurai.
Learn More


Samurai Ring & Pinion Setup Kit
Samurai Ring & Pinion Setup Kit
$149.00

Suzuki Samurai master R&P setup kit includes all bearings, races, and seals needed to professionally install your R&P.
Learn More


Samurai Rock Assault Rear Axle Housing
Samurai Rock Assault Rear Axle Housing
$400.00

Trail-Gear is proud to introduce "The Strongest Samurai Axle Housing Ever Made". The Samurai Rock Assault™ Axle Housing is a Toyota IFS width axle housing that is offset for a Samurai t-case. This housing features a heavy-duty, press formed, 1/4" plate steel center section shell that is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from 1/2” plate steel and comes with our Differential Stud Eliminator Kit to ensure that your differential never pulls out of the housing. The outer offset flanges are made from 4130 chromoly to prevent distortion or bending. Axle tubes are made from 1/4” thick DOM tubing, with a 3” outer diameter. This exclusive design features axle tubes that have been offset above the housing centerline. The inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The center section is offset to line up with the Samurai t-case so that your driveline does not vibrate from being offset. The Samurai Rock-Assault axle housings use stock or aftermarket 1986-1995 Toyota Pickup/4Runner brake backing plates and brake assemblies and uses a custom length chromoly axle shaft that Trail-Gear is also very proud to manufacture.. An optional fill/inspection cap can be installed for an additional fee. Overall housing length is 51 1/2 inches from mounting flange to mounting flange. Axle is shipped unpainted and lightly oiled to prevent rusting. We recommend degreasing housing inside and out before installation and painting.
Learn More


Samurai Rock Assault™ 33-Spline Birfields
Samurai Rock Assault™ 33-Spline Birfields
$169.00

With larger tires and more horse power than ever before being used on the trails these days, upgrades for your rig are more critical than ever.  In a Samurai, one of the more common failures are the stock birfields.  That is why we have developed our new Samurai Rock Assault™ 33-Spline chromoly birfields.  These birfields are made out of 4340 chromoly steel with 300M chromoly steel internal components. This birfield will get you to where you need to go and give you confidence and peace of mind while you are getting there.

**MADE IN THE USA**

Listed below are the testing results of our new Samurai Rock Assault™ 33-Spline Front Axle Kit in comparison to stock and our old Samurai Front Axle Kit.

Samurai Rock Assault™ 33-Spline Front Axle Kit Testing Results
  Stock Old TG Kit New TG 33-Spline Kit
Torque (ft-lbs) 2637 3684 4689

 

Samurai 33-Spline Front Axle Kit, 300750-3-KIT


Learn More


Samurai Rock Assault™ 33-Spline Front Axle Kit
Samurai Rock Assault™ 33-Spline Front Axle Kit
$399.00

Even though our Samurai customers loved our Samurai Rock Assault Front Axle Kit, they still asked for something even stronger. Our CEO challenged the engineering department to think of ways to make the Front Axle kit even stronger, so they put their heads together and came up with this new Samurai Rock Assault™ 33-Spline Front Axle Kit. The Samurai Rock Assault™ 33-Spline Front Axle shafts are made out of 4340 chromoly steel. The upgrades don’t just stop there. We also constructed the Birfield housing out of forged 4340 chromoly steel with 300M chromoly steel internal components. The shafts have a larger diameter than stock and are upgraded to 26-splines on the differential side. The Birfield side of the axle shaft and the inner race of the Birfield have been upgraded to 33-splines to better distribute the torque loading. **MADE IN THE USA** Kit Includes: Birfields Front axles C-clips Note: To install The Samurai Rock Assault™ 33-Spline Front Axle Kit you will need 26 spline spider gears in your 3rd member. You can obtain these 26 spline spider gears either by purchasing the OEM rear axle spider gears (they are 26 spline stock in the rear third) or by simply purchasing a locker with 26 spline spider gears, which is common in this application.
Learn More


Samurai Rock Assault™ Front Axle Shafts: long side (33-29 spline)
Samurai Rock Assault™ Front Axle Shafts: long side (33-29 spline)
$79.00

These axle shafts are the best of the best; manufactured from 4340 chromoly and consistently tested to a failure rate of around 4689ft/lbs.  The shafts have a larger diameter than stock and are upgraded to 26-splines on the differential side. The Birfield side of the axle shaft and the inner race of the Birfield have been upgraded to 33-splines to better distribute the torque loading.

**MADE IN THE USA**

Listed below are the testing results of our new Samurai Rock Assault™ 33-Spline Front Axle Kit in comparison to stock and our old Samurai Front Axle Kit.

Samurai Rock Assault™ 33-Spline Front Axle Kit Testing Results
  Stock Old TG Kit New TG 33-Spline Kit
Torque (ft-lbs) 2637 3684 4689

 

Available Options:

  • Samurai Rock Assault™ Front Axle Shaft, Short Side (33 to 26-Spline), 300751-3
  • Samurai Rock Assault™ Front Axle Shaft, Long Side (33 to 26-Spline), 300752-3

Learn More


Samurai Rock Assault™ Front Axle Shafts: short side (33-26 spline)
Samurai Rock Assault™ Front Axle Shafts: short side (33-26 spline)
$79.00

These axle shafts are the best of the best; manufactured from 4340 chromoly and consistently tested to a failure rate of around 4689ft/lbs.  The shafts have a larger diameter than stock and are upgraded to 26-splines on the differential side. The Birfield side of the axle shaft and the inner race of the Birfield have been upgraded to 33-splines to better distribute the torque loading.

**MADE IN THE USA**

Listed below are the testing results of our new Samurai Rock Assault™ 33-Spline Front Axle Kit in comparison to stock and our old Samurai Front Axle Kit.

Samurai Rock Assault™ 33-Spline Front Axle Kit Testing Results
  Stock Old TG Kit New TG 33-Spline Kit
Torque (ft-lbs) 2637 3684 4689

 

Available Options:

  • Samurai Rock Assault™ Front Axle Shaft, Short Side (33 to 26-Spline), 300751-3
  • Samurai Rock Assault™ Front Axle Shaft, Long Side (33 to 26-Spline), 300752-3

Learn More


Samurai Rock Assault™ Rear Axle Housing Kit
Samurai Rock Assault™ Rear Axle Housing Kit
$699.00

Trail-Gear is proud to introduce "The Strongest Samurai Axle Housing Ever Made". The Samurai Rock Assault™ Axle Housing Kit is a Toyota IFS width axle housing that is offset for a Samurai t-case. This housing features a heavy-duty, press formed, 1/4" plate steel center section shell that is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from 1/2” plate steel and comes with our Differential Stud Eliminator Kit to ensure that your differential never pulls out of the housing. The outer offset flanges are made from 4130 chromoly to prevent distortion or bending. Axle tubes are made from 1/4” thick DOM tubing, with a 3” outer diameter. This exclusive design features axle tubes that have been offset above the housing centerline. The inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The center section is offset to line up with the Samurai t-case so that your driveline does not vibrate from being offset. The Samurai Rock-Assault axle housings use stock or aftermarket 1986-1995 Toyota Pickup/4Runner brake backing plates and brake assemblies and uses a custom length chromoly axle shaft that Trail-Gear is also very proud to manufacture.. An optional fill/inspection cap can be installed for an additional fee. Overall housing length is 51 1/2 inches from mounting flange to mounting flange. Axle is shipped unpainted and lightly oiled to prevent rusting. We recommend degreasing housing inside and out before installation and painting. This housing uses a Toyota 8" differential. Kit Includes: Samurai Rock Assault™ Rear Axle Housing Chromoly Samurai axles Differential stud eliminator kit Differential drain plug Ultra grey silicone
Learn More


Samurai Rock Assault™ Rear Axle Housing Kit with E-Locker
Samurai Rock Assault™ Rear Axle Housing Kit with E-Locker
$699.00

Trail-Gear is proud to introduce "The Strongest Samurai Axle Housing Ever Made". The Samurai Rock Assault™ Axle Housing Kit is a Toyota IFS width axle housing that is offset for a Samurai t-case. This housing features a heavy-duty, press formed, 1/4" plate steel center section shell that is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from 1/2” plate steel and comes with our Differential Stud Eliminator Kit to ensure that your differential never pulls out of the housing. The outer offset flanges are made from 4130 chromoly to prevent distortion or bending. Axle tubes are made from 1/4” thick DOM tubing, with a 3” outer diameter. This exclusive design features axle tubes that have been offset above the housing centerline. The inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The center section is offset to line up with the Samurai t-case so that your driveline does not vibrate from being offset. The Samurai Rock-Assault axle housings use stock or aftermarket 1986-1995 Toyota Pickup/4Runner brake backing plates and brake assemblies and uses a custom length chromoly axle shaft that Trail-Gear is also very proud to manufacture.. An optional fill/inspection cap can be installed for an additional fee. Overall housing length is 51 1/2 inches from mounting flange to mounting flange. Axle is shipped unpainted and lightly oiled to prevent rusting. We recommend degreasing housing inside and out before installation and painting. This housing uses a Toyota 8" differential. Kit Includes: Samurai Rock Assault™ Rear Axle Housing Chromoly Samurai axles Differential stud eliminator kit Differential drain plug Ultra grey silicone
Learn More


Samurai Rock Assault™ Rear Axle Housing with E-Locker
Samurai Rock Assault™ Rear Axle Housing with E-Locker
$400.00

Trail-Gear is proud to introduce "The Strongest Samurai Axle Housing Ever Made". The Samurai Rock Assault™ Axle Housing is a Toyota IFS width axle housing that is offset for a Samurai t-case. This housing features a heavy-duty, press formed, 1/4" plate steel center section shell that is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from 1/2” plate steel and comes with our Differential Stud Eliminator Kit to ensure that your differential never pulls out of the housing. The outer offset flanges are made from 4130 chromoly to prevent distortion or bending. Axle tubes are made from 1/4” thick DOM tubing, with a 3” outer diameter. This exclusive design features axle tubes that have been offset above the housing centerline. The inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The center section is offset to line up with the Samurai t-case so that your driveline does not vibrate from being offset. The Samurai Rock-Assault axle housings use stock or aftermarket 1986-1995 Toyota Pickup/4Runner brake backing plates and brake assemblies and uses a custom length chromoly axle shaft that Trail-Gear is also very proud to manufacture.. An optional fill/inspection cap can be installed for an additional fee. Overall housing length is 51 1/2 inches from mounting flange to mounting flange. Axle is shipped unpainted and lightly oiled to prevent rusting. We recommend degreasing housing inside and out before installation and painting.
Learn More


Samurai Rubber Shift Knob
Samurai Rubber Shift Knob
$7.00

Replacement rubber shift knob fits Samurai transfer case shifter. High quality metric threads for easy installation. Includes recessed Trail-Gear mountain logo on top.
Learn More


Samurai Shock Hoops
Samurai Shock Hoops
$61.95

The shock hoops are made out of 100% DOM and are precision CNC bent to ensure the highest quality product. From the weldment mounting surface to the shock eye brackets measures 7.5”. Some modifications may be required during installation.
Learn More


Samurai Spindle Nut Kit
Samurai Spindle Nut Kit
$7.35

Normally the nuts that hold the wheel bearings can be reused over and over again. If your wheel bearing retainer nuts need replacing this kit is for you. Kit contains 2 nuts, star washer and flat index washer.
Learn More


Samurai Spring Over Axle Conversion Kit
Samurai Spring Over Axle Conversion Kit
$261.45

Samurais are capable and very fun, but they do have low ground clearance, which can often lead to getting stuck, and that is no fun. A spring over axle conversion is the only answer, but finding all the parts and the technical advice to complete your SOA can be cumbersome. We at Trail-Gear have put together a complete and affordable kit that is user friendly and built using the best components on the market. The Trail-Gear Samurai Spring Over Axle Conversion Kit comes with all the needed parts to install your spring over on both the front and rear axles. DOT approved extended brake lines and 9/16" u-bolts are included in the kit along with with laser cut, CNC formed 1/4" spring perches. This is a kit that is simply built to last. No need to take your driveline to a shop to be resized after the conversion is completed because we have also included our world famous billet driveline spacers with all needed hardware. Once the spring over conversion is completed you will be able to install larger tires and a high steer kit. Note: Replacement shocks may be required.
Learn More


Samurai Throttle Cable
Samurai Throttle Cable
$47.25

Stock replacement throttle cable for carburetor equipped Samurai's. Includes nuts on carburetor end. Take just a few minutes to install. If you throttle cable is sticking or does not move freely, it may be time for a replacement.
Learn More


Samurai Trail-Creeper™ Transfer Case
Samurai Trail-Creeper™ Transfer Case
$1,249.00

Do you want low gears without the hassle of rebuilding your transfer case? Let Trail-Gear install our 6.5 transfer case gear set into your 1986-1995 Suzuki Samurai transfer case. We dissemble your t-case, clean and scrub everything. We clearance the housing as needed and install our 6.5 gear set. All new bearings and seals are installed. The stock front output gear is upgraded to the later, heavy duty version to prevent front end slipping. A new shifter seat is installed for smooth shifting. To send in your case for rebuilding, drain all the oil out of the case and remove the shift handle. Wrap the case with rags or a towel to absorb any residual oil. Then cover with at least 1" of bubble wrap. Place the wrapped case in to a box. Please include your full name, address, and phone number inside the box. Then place your order by calling or clicking on the shopping cart below. Ship your transfer case to us. We will install our low range gears and then we pay the return shipping to your door. Price includes a $200 core charge.
Learn More


Samurai Trans Rebuild Kit w/Syncros 1985-1990
Samurai Trans Rebuild Kit w/Syncros 1985-1990
$159.00

Is your transmission making bearing noises or shifting hard? We have a full line of Samurai and Sidekick Transmission Rebuild Kits. Kits feature top quality Koyo and Nachi bearings. Kits include a tube of Permatex Ultra Gray silicon. Kits available with or without syncros.
Learn More


Samurai Transfer Case Gasket/Seal Kit
Samurai Transfer Case Gasket/Seal Kit
$39.00

Transfer-case seal kit gaskets and seals.
Learn More


Samurai Transfer Case Rebuild Kit
Samurai Transfer Case Rebuild Kit
$99.00

Transfer-case rebuild kit with bearings, gaskets and seals.
Learn More


Samurai Transfer Case Shifter Seat
Samurai Transfer Case Shifter Seat
$18.90

Does your transfer case get stuck between gears? Is your shifter stuck and won't move? The most likely cause is a worn out shifter seat. This easy to replace item can be installed in just a few minutes. Fits 1986-1995 Suzuki Samurai transfer cases.
Learn More


Samurai Weld-On Differential Armor
Samurai Weld-On Differential Armor
$19.95

If your still running a stock Samurai axle housing this upgrade is a must have. Trail-Gears weld on Diff Armor has been precision Laser Cut from 3/16” A36 Steel, then CNC formed to weld up perfectly. This product was designed to fit 1986-1995 front and rear Suzuki Samurai axle housings. Part is shipped raw, and requires painting after welding.
Learn More


Samurai Wheel Spacers 1.5
Samurai Wheel Spacers 1.5" wide
$103.95

Wheel spacers are an inexpensive way to get a little more width out of your axle housing, or space your wheels so that you can run a disc brake kit or to simply get more tire clearance. Trail-Gear Samurai Wheel Spacers are offered in 1.5" and 2.0" thick, manufactured from billet 6061-T6 aluminum, and use grade 8 studs and grade 10.9 nuts. Note: Wheel spacers are sold in pairs.
Learn More


Samurai Wheel Spacers 2
Samurai Wheel Spacers 2" wide
$103.95

Wheel spacers are an inexpensive way to get a little more width out of your axle housing, or space your wheels so that you can run a disc brake kit or to simply get more tire clearance. Trail-Gear Samurai Wheel Spacers are offered in 1.5" and 2.0" thick, manufactured from billet 6061-T6 aluminum, and use grade 8 studs and grade 10.9 nuts. Note: Wheel spacers are sold in pairs.
Learn More


Side Mirrors
Side Mirrors
$40.00

Replacement Sideview Mirrors, Left and right.
Learn More


Skid Plate
Skid Plate
$140.00

asy install and beefy as hell! Gives the transfer case full coverage as well as the catalytic converter. Manufactured of 3/16 steel. Comes complete with hardware and instructions. Combines perfectly with our Rockrail and Superslider kits giving you the ultimate in complete vehicle protection. Make your Zuk bulletproof from the bottom up.
Learn More


Solid Transfer Case Mounts
Solid Transfer Case Mounts
$30.00

New Solid Transfer Case Mounts provide ultimate reliability and smooth operation. Simply the BEST possible mounting solution period!! Set of 3
Learn More


Stage 1
Stage 1
$239.00

This is a drag link knuckle over steering system. The knuckle arms in the OTT kit are cut from machine grade steel with horizontal grain. This makes them SUPER strong and they have a lifetime warranty. The kit comes with a Grade 8 or higher bolting AND a caliper mounting system and hardware. Stage 1 puts your drag link to the top of the axle and ELIMINATES bumpsteer on most lifts. Comes with easily serviced grease zerk fitted rod end. Tubing is from 1/4" DOM.
Learn More


Stage 2
Stage 2
$374.00

This kit includes Stage 1 equipment as well as a complete new tie rod setup. This puts the entire steering system over the top of your springs for not only no bumpsteer, but also protection against trail damage. Again, the hardware and mounting system is super strong and tubing is from 1/4" DOM. The arms carry a lifetime warranty. The super strong tubing allows no flex and delivers very tight steering characteristics. All rod ends are standard auto parts store and easily replaceable for servicing down the road.
Learn More


stage 3 clutch
stage 3 clutch
$175.00

Generates up to a 2X (200%) increase in holding capacity over stock systems. This clutch/disc set is designed for use with engines producing 'high horsepower and torque' output, and any radically altered high performance Racing vehicles. This system is also ideally suited for use with four wheel drive vehicles.2500lbs-2900lbs HD pressure plate 6 puck metallic MIBA solid hub Miba is material that uses Aircraft brake.
Learn More


Steering Column Cover
Steering Column Cover
$45.00

OEM Replacement Steering column covers for 1986 to Early 1988. Black Only.
Learn More


Suzuki Samurai Engine
Suzuki Samurai Engine
$1,111.00

We have rebuilt Suzuki Samurai 1.3 Engines and also 1.6 8v and 1.6 16v engines
Learn More


Suzuki Samurai Front Leaf Springs 3
Suzuki Samurai Front Leaf Springs 3"
$187.95

Front and rear Suzuki Samurai leaf springs. Provides 3" of lift. High quality, great price! Military wrap on fix end. Spring pin set up for spring under configuration. Each kit includes front or rear springs. In order to keep our price as low as possible, spring bushings are not included. Tested Spring Rate: 315 lb/in
Learn More


Suzuki Samurai Rear Leaf Springs 3
Suzuki Samurai Rear Leaf Springs 3"
$187.95

Front and rear Suzuki Samurai leaf springs. Provides 3" of lift. High quality, great price! Military wrap on fix end. Spring pin set up for spring under configuration. Each kit includes front or rear springs. In order to keep our price as low as possible, spring bushings are not included. Tested Spring Rate: 265 lb/in
Learn More


Targa Bar Soft Top Rail
Targa Bar Soft Top Rail
$20.00

Targa Bar Soft Top Rail. Or in layman terms the rail that holds the Soft Top to the targa bar.
Learn More


Throttle Cable
Throttle Cable
$30.00

OEM replacement for stock Samurai.
Learn More


Timing Belt Cover
Timing Belt Cover
$30.00

OEM stock Samurai replacement. 1.3 timing belt cover.
Learn More


Toyota Offset Axle Housing
Toyota Offset Axle Housing
$350.00

Toyota offset Differentials for Suzuki Samurai's. Being built on a custom basis currently, we will soon be building fabricated housings available in various widths. Currently only available in the 56.5 width. Sky Manufacturing needs cores! If you have a Toyota 79-85 rear axle housing and shaft, we will offer you $75 in store credit. Splinable axle shafts, these are the shafts that neck up after the splines, wide axle or standard, $25 shaft in store credit. We ran this axle in Moab for EJS, not only does it sit 6 inch's offset, it also totally eliminated drive line vibe, with a non CV shaft in the rear. Its based on many common Toyota parts. It works very well with our front axle widening ki
Learn More


Tracker Hybrid Axle Kit
Tracker Hybrid Axle Kit
$749.00

Our no-hassle ready to bolt-in gear change package includes 4.62 or 5.12 Sidekick ring and pinion gears set up and installed in a Samurai front 3rd member, a matching Sidekick rear 3rd member with drilled flanges for the Samurai drive line, and our Hybrid Rear Axle housing. Shock mounts, diff caps, SPOA perches, and Lockers are not included but can be purchased separately and installed at NO EXTRA CHARGE. Core charges $75.00 for front 3rd member and $75.00 for stock rear housing
Learn More


'Trail Slayer' Samurai Coil Suspension Kit
'Trail Slayer' Samurai Coil Suspension Kit
$3,795.00

Want the ULTIMATE Suzuki Samurai all-purpose Buggy? Well here it is in easy to build kit form! Now you can take advantage of Trail Toughs' years of professional Rock Crawling competition experience and design. Our 'Trail Slayer' series component kits will dominate the trail and leave the competition in the dust. This Samurai kit provides a 100' wheel base and allows for tire sizes from 35' to 42'. Huge articulation yet stable as a ROCK !! Requires use of Toyota pick up 1979 to 1985 front end and Toyota pick up 1986 to 1995 rear end.
Learn More


Trail-Creeper™ Samurai Ring & Pinion Gears 4.57
Trail-Creeper™ Samurai Ring & Pinion Gears 4.57
$199.00

Looking for a Ring & Pinion that you can rely on even on the most punishing trails? Trail-Gear is proud to offer Trail-Creeper Ring & Pinion Gears. These are the very same gears that have won multiple championships on the W.E. Rock circuit and have proven themselves on some of the most grueling off-road courses in the world. Our Trail-Creeper gears are made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance. The gear teeth are cut using Gleason CNC hobbing machines & cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency. The higher accuracy and surface finish also produces a quieter-running gear set, which means they’ll work great on the daily driver too. If you’re looking for a Gear Set that’s easy on the wallet, but can handle whatever you throw at it, look no further, because Trail-Creepers are only available from Trail-Gear.
Learn More


Trail-Creeper™ Samurai Ring & Pinion Gears 5.38
Trail-Creeper™ Samurai Ring & Pinion Gears 5.38
$199.00

Looking for a Ring & Pinion that you can rely on even on the most punishing trails? Trail-Gear is proud to offer Trail-Creeper Ring & Pinion Gears. These are the very same gears that have won multiple championships on the W.E. Rock circuit and have proven themselves on some of the most grueling off-road courses in the world. Our Trail-Creeper gears are made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance. The gear teeth are cut using Gleason CNC hobbing machines & cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency. The higher accuracy and surface finish also produces a quieter-running gear set, which means they’ll work great on the daily driver too. If you’re looking for a Gear Set that’s easy on the wallet, but can handle whatever you throw at it, look no further, because Trail-Creepers are only available from Trail-Gear.
Learn More


Transfer Case Bearing Kit
Transfer Case Bearing Kit
$90.00

Includes bearings, seals, and gaskets necessary for rebuilding a Samurai transfer case.
Learn More


Transfer Case Flange Nut
Transfer Case Flange Nut
$17.00

Fits input and output shaft flanges on 1986-1995 Samurai Transfer Cases. Factory original replacement part.
Learn More


Tube Doors
Tube Doors
$350.00

Heavy duty 1 1/2” .120 wall construction with 2-stage slam latches. Mounts to original hinges - comes uncoated.
Learn More


Tube Front Clip
Tube Front Clip
$595.00

Heavy Duty 1 1/2” .120 wall construction design for maximum hood and radiator protection as well as tire clearance. Includes Zinc grill and 2 stage hood latch. Direct bolt on, no welding required.
Learn More


Unbreakable Tranny Mount
Unbreakable Tranny Mount
$60.00

The last transmission mount you will ever have to replace. Guaranteed never to break!
Learn More


Used Parts
Used Parts
$0.00

We have 10 Samurai’s just for parts please call us and will give you a price on what you need.
Learn More


Weber Carburetor
Weber Carburetor
$270.00

The best upgrade you can do to your stock samurai.
Learn More


Weld In Steering Rod Bungs (LH)
Weld In Steering Rod Bungs (LH)
$25.20

Finally a weld in bung with the thread pitch of an FJ80 TRE, which is the most commonly used TRE in Toyota hi-steer kits. Once welded into your tie rod or drag link, this bung will allow you to make a custom length steering shaft in minutes. Bungs are designed to weld into 1.25" x .25" wall steering rods. They are precision machined from 8620 solid billet steel and are sold individually as RH or LH.
Learn More


Weld In Steering Rod Bungs (RH)
Weld In Steering Rod Bungs (RH)
$25.20

Finally a weld in bung with the thread pitch of an FJ80 TRE, which is the most commonly used TRE in Toyota hi-steer kits. Once welded into your tie rod or drag link, this bung will allow you to make a custom length steering shaft in minutes. Bungs are designed to weld into 1.25" x .25" wall steering rods. They are precision machined from 8620 solid billet steel and are sold individually as RH or LH.
Learn More


Wheel Spacers
Wheel Spacers
$100.00

1, 1 ¼, or 2in wheel spacers.
Learn More


Window Crank
Window Crank
$10.00

Replacement Window crank handle for your Suzuki. Sold individually. Includes new retainer clip - because we know yours went sailing across the yard when you took it off
Learn More


Windshield Frame
Windshield Frame
$250.00

Brand new Suzuki Samurai windshield frame. Fits 1986-1995 soft top vehicles. Primer coated and ready to paint. Does not include any hardware. Reuse your old hardware or remember that we are an authorized Suzuki parts dealer. Contact and we can supply you with ANY pieces for your Samurai.
Learn More


Windshield Garnish
Windshield Garnish
$35.00

Replacement OEM windshield Garnish. Or in layman terms, the strip that holds the front of the softop in place on top of the Winshield.
Learn More


YJ Conversion Kit
YJ Conversion Kit
$450.00

Going BIG and going FLEXY are two things we love to do around here. One of the best riding and flexiest ways to get there is by swapping out to a completely new suspension. If you've had thoughts of giving your rig a complete revamp with new springs and all, the Wrangler spring swap kit might be just the thing for you. This kit comes with just the mounts to mount your yj springs to your samurai.
Learn More


Zors Brute Bumpers
Zors Brute Bumpers
$285.00

This is another simple bolt on product that will turn heads and give your zuk some muscle against trees and rocks. Fully welded and made with the same procedures and materials as the winch bumpers. If ordered with the class 3 receiver, it is supported by additional thick wall square tubing welded between the uprights. No drilling required to mount.
Learn More


Zors Rear Bumper
Zors Rear Bumper
$286.00

These are Heavy Duty Rear Bumpers. Made from 3/16th" flat steel plate CNC punch pressed then folded on a 100 ton press. Heavily welded in corners and seams for strength and durability and also includes class 3 receiver.
Learn More


Zors Subspeed Winch Bumper
Zors Subspeed Winch Bumper
$253.00

This bumper looks like the Front Winch Ready Rock Crawler Bumpers but is a lower profile without the normal uprights.
Learn More


Zors Winch Bumper
Zors Winch Bumper
$256.00

Each of these bumpers start with the prefab center section. It has seen many design changes over the last few years including a winch plate and fairlead bracket. This center section was designed to hug the front of the Samurai allowing the most possible clearance when ledge crawling. Built for winches pulling up to 9,000 lbs
Learn More


140 Item(s) Show per page