We now accept the following payment options:

129 Item(s) Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. Next
Show per page
Samurai Rock Assault™ Rear Axle Housing Kit
Samurai Rock Assault™ Rear Axle Housing Kit
$699.00

Trail-Gear is proud to introduce "The Strongest Samurai Axle Housing Ever Made". The Samurai Rock Assault™ Axle Housing Kit is a Toyota IFS width axle housing that is offset for a Samurai t-case. This housing features a heavy-duty, press formed, 1/4" plate steel center section shell that is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from 1/2” plate steel and comes with our Differential Stud Eliminator Kit to ensure that your differential never pulls out of the housing. The outer offset flanges are made from 4130 chromoly to prevent distortion or bending. Axle tubes are made from 1/4” thick DOM tubing, with a 3” outer diameter. This exclusive design features axle tubes that have been offset above the housing centerline. The inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The center section is offset to line up with the Samurai t-case so that your driveline does not vibrate from being offset. The Samurai Rock-Assault axle housings use stock or aftermarket 1986-1995 Toyota Pickup/4Runner brake backing plates and brake assemblies and uses a custom length chromoly axle shaft that Trail-Gear is also very proud to manufacture.. An optional fill/inspection cap can be installed for an additional fee. Overall housing length is 51 1/2 inches from mounting flange to mounting flange. Axle is shipped unpainted and lightly oiled to prevent rusting. We recommend degreasing housing inside and out before installation and painting. This housing uses a Toyota 8" differential. Kit Includes: Samurai Rock Assault™ Rear Axle Housing Chromoly Samurai axles Differential stud eliminator kit Differential drain plug Ultra grey silicone
Learn More


Samurai Rock Assault™ Rear Axle Housing Kit with E-Locker
Samurai Rock Assault™ Rear Axle Housing Kit with E-Locker
$699.00

Trail-Gear is proud to introduce "The Strongest Samurai Axle Housing Ever Made". The Samurai Rock Assault™ Axle Housing Kit is a Toyota IFS width axle housing that is offset for a Samurai t-case. This housing features a heavy-duty, press formed, 1/4" plate steel center section shell that is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from 1/2” plate steel and comes with our Differential Stud Eliminator Kit to ensure that your differential never pulls out of the housing. The outer offset flanges are made from 4130 chromoly to prevent distortion or bending. Axle tubes are made from 1/4” thick DOM tubing, with a 3” outer diameter. This exclusive design features axle tubes that have been offset above the housing centerline. The inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The center section is offset to line up with the Samurai t-case so that your driveline does not vibrate from being offset. The Samurai Rock-Assault axle housings use stock or aftermarket 1986-1995 Toyota Pickup/4Runner brake backing plates and brake assemblies and uses a custom length chromoly axle shaft that Trail-Gear is also very proud to manufacture.. An optional fill/inspection cap can be installed for an additional fee. Overall housing length is 51 1/2 inches from mounting flange to mounting flange. Axle is shipped unpainted and lightly oiled to prevent rusting. We recommend degreasing housing inside and out before installation and painting. This housing uses a Toyota 8" differential. Kit Includes: Samurai Rock Assault™ Rear Axle Housing Chromoly Samurai axles Differential stud eliminator kit Differential drain plug Ultra grey silicone
Learn More


Samurai Rock Assault™ Rear Axle Housing with E-Locker
Samurai Rock Assault™ Rear Axle Housing with E-Locker
$400.00

Trail-Gear is proud to introduce "The Strongest Samurai Axle Housing Ever Made". The Samurai Rock Assault™ Axle Housing is a Toyota IFS width axle housing that is offset for a Samurai t-case. This housing features a heavy-duty, press formed, 1/4" plate steel center section shell that is specially shaped to ensure a minimum of 3/4" additional clearance under the differential. The differential mounting surface is made from 1/2” plate steel and comes with our Differential Stud Eliminator Kit to ensure that your differential never pulls out of the housing. The outer offset flanges are made from 4130 chromoly to prevent distortion or bending. Axle tubes are made from 1/4” thick DOM tubing, with a 3” outer diameter. This exclusive design features axle tubes that have been offset above the housing centerline. The inner axles ride near the bottom of the axle tubes rather than in the center. The results are an increase of 3/8" ground clearance under the axle tubing. The center section is offset to line up with the Samurai t-case so that your driveline does not vibrate from being offset. The Samurai Rock-Assault axle housings use stock or aftermarket 1986-1995 Toyota Pickup/4Runner brake backing plates and brake assemblies and uses a custom length chromoly axle shaft that Trail-Gear is also very proud to manufacture.. An optional fill/inspection cap can be installed for an additional fee. Overall housing length is 51 1/2 inches from mounting flange to mounting flange. Axle is shipped unpainted and lightly oiled to prevent rusting. We recommend degreasing housing inside and out before installation and painting.
Learn More


Samurai Rubber Shift Knob
Samurai Rubber Shift Knob
$7.00

Replacement rubber shift knob fits Samurai transfer case shifter. High quality metric threads for easy installation. Includes recessed Trail-Gear mountain logo on top.
Learn More


Samurai Shock Hoops
Samurai Shock Hoops
$61.95

The shock hoops are made out of 100% DOM and are precision CNC bent to ensure the highest quality product. From the weldment mounting surface to the shock eye brackets measures 7.5”. Some modifications may be required during installation.
Learn More


Samurai Spindle Nut Kit
Samurai Spindle Nut Kit
$7.35

Normally the nuts that hold the wheel bearings can be reused over and over again. If your wheel bearing retainer nuts need replacing this kit is for you. Kit contains 2 nuts, star washer and flat index washer.
Learn More


Samurai Spring Over Axle Conversion Kit
Samurai Spring Over Axle Conversion Kit
$261.45

Samurais are capable and very fun, but they do have low ground clearance, which can often lead to getting stuck, and that is no fun. A spring over axle conversion is the only answer, but finding all the parts and the technical advice to complete your SOA can be cumbersome. We at Trail-Gear have put together a complete and affordable kit that is user friendly and built using the best components on the market. The Trail-Gear Samurai Spring Over Axle Conversion Kit comes with all the needed parts to install your spring over on both the front and rear axles. DOT approved extended brake lines and 9/16" u-bolts are included in the kit along with with laser cut, CNC formed 1/4" spring perches. This is a kit that is simply built to last. No need to take your driveline to a shop to be resized after the conversion is completed because we have also included our world famous billet driveline spacers with all needed hardware. Once the spring over conversion is completed you will be able to install larger tires and a high steer kit. Note: Replacement shocks may be required.
Learn More


Samurai Throttle Cable
Samurai Throttle Cable
$27.00

Stock replacement throttle cable for carburetor equipped Samurai's. Includes nuts on carburetor end. Take just a few minutes to install. If you throttle cable is sticking or does not move freely, it may be time for a replacement.
Learn More


Samurai Trans Rebuild Kit w/Syncros 1985-1990
Samurai Trans Rebuild Kit w/Syncros 1985-1990
$159.00

Is your transmission making bearing noises or shifting hard? We have a full line of Samurai and Sidekick Transmission Rebuild Kits. Kits feature top quality Koyo and Nachi bearings. Kits include a tube of Permatex Ultra Gray silicon. Kits available with or without syncros.
Learn More


Samurai Transfer Case Gasket/Seal Kit
Samurai Transfer Case Gasket/Seal Kit
$39.00

Transfer-case seal kit gaskets and seals.
Learn More


129 Item(s) Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. Next
Show per page