We now accept the following payment options:

184 Item(s) Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. Next
Show per page
 Heavy Duty Transfer Case Mount
Heavy Duty Transfer Case Mount
$70.00

Finally a Toyota T case mount that can handle the abuse of rock crawling with the ultra low torque of dual cases is here. The TGHD T Case mount kit will totally eliminate any worries of a broken T case mount on the trail, or on the comp site. We are so confident in this product that we are offering it with our world famous Lifetime No Questions Ask Warranty. The TGHD T case mount is stamped out of 1/4" thick steel plate, and then welded on a jig to ensure the best fit possible. These T case mount kits are coated with black zinc for a trick finish that will last a lifetime. The bushings are polyurethane for long lasting performance and durability. Can be used as a stock replacement on 4cyl T cases for applications from 1982-1995, or with our dual case crossmember and other popular dual case crossmembers on all 1979-1995 applications.
Learn More


3.0L V6 Adapter Plate
3.0L V6 Adapter Plate
$366.45

This adapter plate allows one or more gear driven transfer case(s) to be bolted up to 1988-1995 Toyota 3.0L V6 5 speed transmissions. Our updated design does not require modification to the transmission for installation thanks to the use of countersunk mounting hardware. Another exclusive feature is the use of all nine transmission mounting bolts on both single and dual case installations. With our V6 adapter plate you can install the legendary Toyota gear driven transfer case(s) in your trail rig. These cases are known for their strength, reliability and configuration flexibility. With the correct adapter plate you can put one, two or even three transfer cases into your truck. Each case can have stock 2.28 gears or 4.70 low range gears installed. Extensive vehicle modifications are required for installation including: retubing both front and rear drive shafts, additional floorboard hole for the second transfer case shifter, speedometer cable extension, and crossmember replacement. Note: One top shift case will be needed to perform this conversion, for duals, both cases need to be top shift. Also required is one 23-spline 2.28 input gear.
Learn More


30 Spline Birfield/Axle Kit
30 Spline Birfield/Axle Kit
$550.00

With larger tires and more horse power than ever before being used on the trails these days, upgrades for your rig are more critical than ever. In a Toyota, one of the common failures are your stock 27 spline birfields. That is why we have developed our new 30 spline chromoly birfields, the Dirty 30s' ™. This birfield will get you to where you need to go and give you confidence and peace of mind while you are getting there. These Dirty 30’s are made out of 100% 4340 chromoly and are precision polished to remove any imperfections that may cause stress risers. The ball bearings are manufactured out of the highest quality attainable in chrome steel ball bearing manufacturing, AISI 52100 is the standard of material used. The 30 spline axle shafts are 100% chromoly with a polished seal surface. These parts have undergone years of extensive in-house and field testing and we are proud to share the results with you. The average failure rate was consistently at 8500 ft. lbs. of applied torque at a 30 degree angle. They were also field tested at the Hammers in our competition FToy and other buggies and trucks with no failures to report. In fact, we feel so confident about the quality of these Dirty 30’s that we are offering them with a no questions asked lifetime warranty.
Learn More


4.70 T-Case Reduction Gear Kit
4.70 T-Case Reduction Gear Kit
$599.00

For rock crawling, lower transfer case gears give you the control you need to keep your truck on track. Trail-Gear offers an affordable 4.70:1 gear kit for your gear driven Toyota transfer case. Trail-Creeper T-Case gears are available in 21 and 23 spline configurations. Kits include replacement gears, gaskets and seals. Disassembly and modification of transfer case is required for installation. Input gears are precision ground & micro-polished to guarantee the removal of all surface imperfections in the forging. Trail-Creeper gears fit Toyota 4WD Pickup's and 4Runners from 1979-1995 with gear drive style transfer cases. Gear sets reduce the stock low range from 2.28 to 4.70, nearly twice the the reduction of the stock gears. High range is not affected and remains 1 to 1. Each gear set carries a full lifetime guarantee. If your gears ever fail to function properly, simply return them to us for replacement. V6 applications require the transfer case be replaced with a 4Cyl gear drive unit and V6 Adapter plate. Speedo cable, floorboard, drive shaft, and crossmember changes may also be required.
Learn More


5100 Bilstein Rear Shocks
5100 Bilstein Rear Shocks
$89.25

Bilstein 5100 mono tube gas pressure shock has the longer travel needed for rear lift applications. Fits 1986-1995 Toyota 4WD Pickups and 1995-2004 Toyota Tacoma Prerunners/4WD. Intended for vehicles with 1” – 2.5” of rear lift. Includes shock boot and vulcanized neoprene rubber bushings. Sold Individually.

Travel Length Extended Length Collapsed Length
7.92" 22.57" 14.65"

 

Application Data:

  • 1986-1995 Toyota 4WD Pickups
  • 1995-2004 Toyota Tacoma Prerunners/4WD

Learn More


54mm Spindle Socket
54mm Spindle Socket
$17.85

Our 54mm sockets are designed for servicing Toyota front axle wheel bearings. We know you don't carry a 3/4" drive ratchet in your tool bag so we made these sockets fit right onto your 3/8" ratchet with no additional adaptors needed.
Learn More


AISIN/SECO Clutch Kits
AISIN/SECO Clutch Kits
$198.45

Top quality, OEM clutch kits for your Toyota Pickup, 4Runner and Tacoma. Kits include long life clutch disk, pressure plate, release bearing, pilot bearing, and alignment tool. Clutch Kits - Ceramic High Performance High performance Ceramic clutches are here! Same great quality as factory. Includes 6 puck Ceramic disk and 1600 lb pressure plate. Ceramic clutches outlast stock clutch kits with up to twice the life. Lighter design reduces chances of catastrophic failure from over spin. This can happen when your in a crawl gear going down hill and you push in the clutch and continue to gain speed. Ceramic clutches don't fade like conventional clutches when they get hot. You get the same solid performance hot or cold!

Important – Read Application List Before Ordering


Learn More


Assembled 3rd Members
Assembled 3rd Members
$1.00

All new parts, no used housings or internal parts. Ready to drop into your axle. Third members feature top quality ring & pinion gears and lockers. V6 units feature larger OEM style V6 gear sets with longer pinion gear. Each unit is setup with solid pinion spacers for long gear life. Triple drilled flanges included covers common driveshaft patterns. Call for pricing.
Learn More


184 Item(s) Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. Next
Show per page