We now accept the following payment options:

184 Item(s) Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. Next
Show per page
Rock Sliders 78
Rock Sliders 78" 88-04 Xtra-Cab, Dbl-Cab, Pair
$208.95

Rock sliders are a great way of protecting the rocker panels of your Toyota Pickup, 4Runner, Tacoma, or FJ Cruiser. Trail-Gear has designed it’s Rock Sliders to be the strongest on the market, starting with 1 3/4" OD x .120 wall 1035 DOM. Trail-Gear Rock Sliders are the only rock sliders on the market that use 1035 DOM tubing, based on our testing we believe that using DOM tubing in this application makes our rock sliders the strongest, most affordable available today. Other companies try and cut manufacturing costs by using less expensive HREW tubing, but the end result is always the same, under extreme stress the HREW tubing splits down the seam, failing. Trail-Gear’s heavy duty design can take a pounding from the rocks while keeping body damage to a minimum, allowing you to slide over or between rocks on even the hardest trails without damage. Trail-Gear rock sliders are strong enough to hold the entire weight of the truck, a high-lift jack can be used anywhere along the slider for repositioning the rig on the trail, or simply high-lifting it up for repairs. The mounting legs are not welded onto the slider, but are shipped loose so that legs can be attached in different mounting positions. Mounting legs are pre-notched on one side and can be trimmed if needed on the opposite side. Mounting legs are 11 1/4" long, so they allow the sliders to stick out far enough to be used as a step if desired. Six mounting legs, three per side, are provided with the 58" and the 67" sliders, and eight mounting legs, four per side are provided with our 78" sliders. Trail-Gear rock sliders are sold in pairs, and are shipped raw with no finish, lightly oiled to prevent rusting.
Learn More


Rock-Ring Knuckle Felt Protectors
Rock-Ring Knuckle Felt Protectors
$26.25

We have had a lot of people tell us they don't like the stock inner felt plates because they are so thin and are easily damaged in the rocks. Well check out this trick solution... super heavy duty rings made from 1/8" (.125) material. Stock covers are just .040 thick. That's over three times thicker than stock! These bolt on exactly like stock units. Sold as a set of 4 plates for doing both front knuckles. Fits 1979-1985 Toyota solid front axle.
Learn More


Safari Top
Safari Top
$160.00

Breeze O Tops 1000 Denier Cordura Safari Top has it all! This super tough Cordura top goes all the way back to the rear stock tension hoop for the ultimate in fun and function. Your rear passengers or cargo will have much more protection than the Bikini or Safari Mesh top. This top also has a clear PVC coating to prevent any rain or water seepage. More than enough straps, buckles and stainless steel locks to keep everything tight and in place. Use the side grommet holes for an even more secure top.
Learn More


Samurai Driveline to Toyota Adapter
Samurai Driveline to Toyota Adapter
$24.15

This driveline adapter allows you to bolt your stock Samurai driveline to a Toyota axle or transfer case without modifying the driveline. This adapter has both 1986-89 and 1990-95 Samurai driveline patterns.
Learn More


Samurai Driveline to Toyota Adapter w/Dust Shield (differential)
Samurai Driveline to Toyota Adapter w/Dust Shield (differential)
$30.45

This driveline adapter allows you to bolt your stock Samurai driveline to a Toyota axle or transfer case without modifying the driveline. This adapter has both 1986-89 and 1990-95 Samurai driveline patterns.
Learn More


Samurai Driveline to Toyota Adapter w/Dust Shield (transfer case)
Samurai Driveline to Toyota Adapter w/Dust Shield (transfer case)
$30.45

This driveline adapter allows you to bolt your stock Samurai driveline to a Toyota axle or transfer case without modifying the driveline. This adapter has both 1986-89 and 1990-95 Samurai driveline patterns.
Learn More


Six Shooter Knuckle Kit
Six Shooter Knuckle Kit
$282.45

Over a year in development and testing, this new knuckle design sets a new standard in Toyota knuckle strength and reliability. This kit totally eliminates the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose and shearing off the studs. The knuckle housing is also thicker than stock and larger gussets have been added around the outside of the knuckle for extra strength. Precision CNC machined, each knuckle is direct bolt on, heavy duty replacement. Six Shooter Knuckles are sold as a pair and include our set of special 6 hole shims for use between the top of the knuckle and the steering arm. Also included is a 1/2" coarse thread bolt to help remove the steering arms for knuckle service. To remove the steering arms, remove all 6 nuts, then install the bolt in the top of the arm. As the bolt is tightened, the steering arm is pulled up off the knuckle. Stock lower bearing plates and shims from your old knuckles are needed for knuckle assembly. A minimum of four additional steering arm studs are needed for installation. No questions asked, lifetime warranty on all knuckles, arms, rod ends and rods. Knuckle and steering arms are sold separately. In order to install all six studs, both knuckles and steering arm kits are required.
Learn More


Solid Pinion Spacer 4cyl
Solid Pinion Spacer 4cyl
$21.00

Solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a little longer to set up but you won't have to keep retorque the pinion nut down the road.
Learn More


Solid Pinion Spacer V6 & High Pinion
Solid Pinion Spacer V6 & High Pinion
$21.00

Solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a little longer to set up but you won't have to keep retorque the pinion nut down the road.
Learn More


Spool Locker
Spool Locker
$156.45

Low cost traction. A spool replaces the differential carrier, locking the axle shafts together. Locking the axles provides maximum traction for off road use. Not recommended for use on the pavement. For use only in rear axle, use in the front will limit turning ability. Fits 1979-1995 Toyota 8" 3rd members.

Available options:

  • Spool Locker 4Cyl, 140163-1
  • Spool Locker V6, 140164-1

Learn More


184 Item(s) Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. Next
Show per page