We now accept the following payment options:

184 Item(s) Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. Next
Show per page
Spring Hanger Kit
Spring Hanger Kit
$187.95

Hanger kit allows of hanging of leaf springs on 1986-1995 Toyota Pickups and 4Runners. Kit designed to work with many 3" - 6" lift aftermarket springs. Frame jigs make it easy to place shackle tubes in your frame. To install, place jigs on frame under the cab body mount. Mark the frame, and cut frame tube holes with torch. Slide tubes in place and weld in. Clamp front hanger in place and weld. Bolt on springs with included bushings and shackles. Kit contains: Front offset hanger w/ gussets 5" Front Offset Greasable shackles Frame tubes Tube jigs
Learn More


Steering Columns
Steering Columns
$61.95

130297-1-KIT - This steering column will allow you to use your existing Toyota steering linkage without having to buy a coupler and then cut and weld on your steering shaft.  This steering column measures 3 1/4 inches from the base of the flange to the outer edge of the shaft, and fits most brands of steering valves (Orbitals) that are commonly used in this application.

130298-1-KIT - This steering column measures 4 3/4 inches from the base of the flange to the outer edge of the shaft, the OD of the shaft is 3/4 inches and the shaft itself is round with no splines, it is a blank. This column will fit most popular steering valve applications currently used in off-roading.

130299-1-KIT - This steering column measures 8 3/4 inches from the flange to the outer edge of the shaft, the OD of the shaft is 3/4 inches and is round with no splines. This kit can be used with a coupler and a steering shaft. Fits most popular steering valves used for rock crawling.

Note: Does not include orbital or orbital mounting kit.

Available options:

  • Steering Column, 3 1/4 Inches, 130297-1-KIT
  • Steering Column, 4 3/4 Inches, 130298-1-KIT
  • Steering Column, 8 3/4 Inches, 130299-1-KIT

Learn More


Stock Replacement Drive Shaft U-Joints
Stock Replacement Drive Shaft U-Joints
$30.45

OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. These U-Joint fit most 1979-1995 4wd applications. Includes four install clips and Zerk grease fitting (not shown in photo). Note: Does not fit CV side of driveline.
Learn More


Super Metal Hub Stud Kit
Super Metal Hub Stud Kit
$72.45

Rock crawling is an extreme hobby that puts extreme wear and tear on your truck. It is essential to upgrade and maintain every part on your truck from axles to suspension. It is equally important to upgrade the hardware that keeps everything together. The same can be said for the hub studs. When the hub studs fail, you will be left without four wheel drive, and often times the hub will be unrepairable. This is the main reason why Trail-Gear has decided to make an affordable upgrade that won’t break the bank.

Our Super Metal Hub Stud Kit is constructed from a proprietary alloy made exclusively for Trail Gear.  These studs are manufactured to our strict specifications and are significantly stronger than OEM standard (testing exceeded Class 12.9 standards of 177,000 psi tensile strength).Our Super Metal hub studs are zinc-plated to ensure that it is protected from rust and corrosion for many rough years to come. On the top of the stud we machined a 6mm hex head so that installation and maintenance is easy and no special tools are required. Our Super Metal Hub Stud Kit comes with enough hardware to upgrade your front axle.

These studs are almost as strong as our industry-leading ARP 2000 Hub Studs, but come at a fraction of the price.

Kit Includes:

  • 12x Super Metal Hub Studs
  • 12x Lock Washers
  • 12x Cone Washers
  • 12x Class 12.9 Hex Nuts

Fits Toyota Pickup/4Runner solid front axle hub from 1979-1985, 1990-1997 Toyota FJ80 Landcruiser, and Trail-Gear Rock Assault Front Axles


Learn More


Tacoma Driveline Spacer Kit
Tacoma Driveline Spacer Kit
$11.55

Lifting a newer Tacoma changes the pinion angle between the driveline and the rear axle. This often results in excessive driveline vibration. This spacer kit fits in between the carrier bearing and the crossmember, and will lower the carrier bearing to correct the driveline angle. With the easy-to-follow installation instructions, you can install this kit and be back on the trail with a smoother ride in minutes. The steel spacers in this kit are zinc-plated to prevent corrosion. Longer M10 mounting bolts are included in this kit as well. Fits a 2005-2013 Toyota Tacoma (All Engines). **MADE IN THE USA**
Learn More


Tacoma Front Spacer 3
Tacoma Front Spacer 3" Lift
$156.45

Need to add extra lift to the front end of your Tacoma? Trail-Gear is now offering the Tacoma Front Spacer Lift, 3” for your Toyota Tacoma 1995-2013 Prerunner/4WD. Our Tacoma Front Spacer Lifts are made from CNC-machined 6061-T6 aircraft grade aluminum and are anodized orange to prevent corrosion. The Tacoma Front Spacer Lift includes Class 10.9 bolts for the top spacer. Our Tacoma Front Spacer Lift will work with stock shocks and many other shocks.

Note: Your vehicle will require a front-end alignment after the installation of this kit.

Application Data:

  • 1995-2004 Tacoma Prerunner/4WD
  • 2005-2013 Tacoma Prerunner/4WD
  • 1996-2012 4Runner 4WD

MADE IN THE USA


Learn More


Tacoma SAS Kit A
Tacoma SAS Kit A
$1,521.45

Trail-Gear is proud to be the first in the industry to develop a series of Tacoma SAS Kits for 95-04 Tacomas that are complete, user friendly, and affordable. Trail-Gear has a great respect for the Tacoma and the Tacoma market, so we have dedicated our resources to developing a full line of Tacoma products. Every Tacoma component in these kits have been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With our full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. Trail-Gear offers three different Tacoma SAS kits. We feel that offering a selection allows the customer to pick the kit that is best suited and priced for their unique build. All gussets and frame supports are included, so the Tacoma will be much stronger when you finish than it was from the factory. These kits are built by Tacoma owners, for Tacoma owners. If you have any questions you can call our technical support line with confidence that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Includes:

  • Front Spring hanger
  • All spring and shackle bushings
  • Shock Hoops
  • 5125 Bilstein Shocks (Your size choice)
  • Frame Tube Jigs
  • Frame Tubes
  • Shackle mount Kit
  • Front Frame Reinforcement Plates (With IFS Box Mount Kit Incorporated)
  • Steering shaft
  • Steering couplers
  • Fire wall plate
  • Bump stop kit
  • Heavy Duty Front Leaf Springs
  • Available Options:

    • Tacoma SAS Kit A, 1995.5, 3" Leaf Spring, 12" Shocks, 111256-1-KIT
    • Tacoma SAS Kit A, 96-04, 3" Leaf Spring, 12" Shocks, 110213-1-KIT
    • Tacoma SAS Kit A, 1995.5, 4" Leaf Spring, 12" Shocks, 111356-1-KIT
    • Tacoma SAS Kit A, 96-04, 4" Leaf Spring, 12" Shocks, 111357-1-KIT
    • Tacoma SAS Kit A, 1995.5, 5" Leaf Spring, 14" Shocks, 111358-1-KIT
    • Tacoma SAS Kit A, 96-04, 5" Leaf Spring, 14" Shocks, 111359-1-KIT

    Note: If you have a 3.4L engine, you may need to replace your radiator. See steps 116-120 of the instructions for more information.

    Note For SAS Kit A Only: With single case applications, a high clearance t-case crossmember is required. Rock Defense™ Tacoma Single T-Case Crossmember, 120198-1-KIT. Additional oil pan clearance may be required. See our Tacoma SAS Oil Pan Kit for more information.

    Note For SAS Kit A, B, and C: You will need the following components to complete your build:


    Learn More


    Tacoma SAS Kit B
    Tacoma SAS Kit B
    $2,466.45

    Trail-Gear is proud to be the first in the industry to develop a series of Tacoma SAS Kits for 95-04 Tacomas that are complete, user friendly, and affordable. Trail-Gear has a great respect for the Tacoma and the Tacoma market, so we have dedicated our resources to developing a full line of Tacoma products. Every Tacoma component in these kits have been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With our full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. Trail-Gear offers three different Tacoma SAS kits. We feel that offering a selection allows the customer to pick the kit that is best suited and priced for their unique build. All gussets and frame supports are included, so the Tacoma will be much stronger when you finish than it was from the factory. These kits are built by Tacoma owners, for Tacoma owners. If you have any questions you can call our technical support line with confidence that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Includes:

  • Front Spring hanger
  • All spring and shackle bushings
  • Shock Hoops
  • 5125 Bilstein Shocks (Your size choice)
  • Frame Tube Jigs
  • Frame Tubes
  • Shackle mount Kit
  • Front Frame Reinforcement Plates (With IFS Box Mount Kit Incorporated)
  • Steering shaft
  • Steering couplers
  • Fire wall plate
  • Bump stop kit
  • Heavy Duty Front Leaf Springs
  • Front extended brake line
  • Fully loaded left and right calipers
  • Left and right caliper hard lines
  • Vented brake rotors
  • Knuckle service kit with wheel bearings
  • U-bolt flip kit
  • Tacoma high steer kit
  • Fully loaded Six Shooter™ Knuckle Kit
  • Knuckle hardware
  • 86-88 IFS steering box
  • Oil pan kit (2.7L or 3.4L)
  • Power steering hose conversion kit
  • Single t-case crossmember
  • Full color installation instructions
  • Available Options:

    • Tacoma SAS Kit B, 1995.5, 3" Leaf Springs, 12" Shocks, 2.7L, 111258-1-KIT
    • Tacoma SAS Kit B, 1995.5, 3" Leaf Springs, 12" Shocks, 3.4L, 111364-1-KIT
    • Tacoma SAS Kit B, 96-04, 3" Leaf Springs, 12" Shocks, 2.7L, 110209-1-KIT
    • Tacoma SAS Kit B, 96-04, 3" Leaf Springs, 12" Shocks, 3.4L, 111365-1-KIT
    • Tacoma SAS Kit B, 1995.5, 4" Leaf Springs, 12" Shocks, 2.7L, 111360-1-KIT
    • Tacoma SAS Kit B, 1995.5, 4" Leaf Springs, 12" Shocks, 3.4L, 111366-1-KIT
    • Tacoma SAS Kit B, 96-04, 4" Leaf Springs, 12" Shocks, 2.7L, 111361-1-KIT
    • Tacoma SAS Kit B, 96-04, 4" Leaf Springs, 12" Shocks, 3.4L, 111367-1-KIT
    • Tacoma SAS Kit B, 1995.5, 5" Leaf Springs, 14" Shocks, 2.7L, 111362-1-KIT
    • Tacoma SAS Kit B, 1995.5, 5" Leaf Springs, 14" Shocks, 3.4L, 111368-1-KIT
    • Tacoma SAS Kit B, 96-04, 5" Leaf Springs, 14" Shocks, 2.7L, 111363-1-KIT
    • Tacoma SAS Kit B, 96-04, 5" Leaf Springs, 14" Shocks, 3.4L, 111369-1-KIT

    Note: If you have a 3.4L engine, you may need to replace your radiator. See steps 116-120 of the instructions for more information.

    Note For SAS Kit A Only: With single case applications, a high clearance t-case crossmember is required. Rock Defense™ Tacoma Single T-Case Crossmember, 120198-1-KIT. Additional oil pan clearance may be required. See our Tacoma SAS Oil Pan Kit for more information.

    Note For SAS Kit A, B, and C: You will need the following components to complete your build:


    Learn More


    Tacoma SAS Kit C
    Tacoma SAS Kit C
    $4,566.45

    Trail-Gear is proud to be the first in the industry to develop a series of Tacoma SAS Kits for 95-04 Tacomas that are complete, user friendly, and affordable. Trail-Gear has a great respect for the Tacoma and the Tacoma market, so we have dedicated our resources to developing a full line of Tacoma products. Every Tacoma component in these kits have been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With our full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. Trail-Gear offers three different Tacoma SAS kits. We feel that offering a selection allows the customer to pick the kit that is best suited and priced for their unique build. All gussets and frame supports are included, so the Tacoma will be much stronger when you finish than it was from the factory. These kits are built by Tacoma owners, for Tacoma owners. If you have any questions you can call our technical support line with confidence that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Includes:

  • Front Spring hanger
  • All spring and shackle bushings
  • Shock Hoops
  • 5125 Bilstein Shocks (Your size choice)
  • Frame Tube Jigs
  • Frame Tubes
  • Shackle mount Kit
  • Front Frame Reinforcement Plates (With IFS Box Mount Kit Incorporated)
  • Steering shaft
  • Steering couplers
  • Fire wall plate
  • Bump stop kit
  • Heavy Duty Front Leaf Springs
  • Front extended brake line
  • Fully loaded left and right calipers
  • Left and right caliper hard lines
  • Vented brake rotors
  • Knuckle service kit with wheel bearings
  • U-bolt flip kit
  • Tacoma high steer kit
  • Fully loaded Six Shooter™ Knuckle Kit
  • Knuckle hardware
  • 86-88 IFS steering box
  • Oil pan kit (2.7L or 3.4L)
  • Power steering hose conversion kit
  • Single t-case crossmember
  • Full color installation instructions
  • Rock Assault™ Front Axle Housing
  • Rock Assault™ Steering Stops
  • Dirty 30s™ 30 Spline Birfield/Axle Kit
  • Assembled 3rd Member
  • Your choice of a Detroit or ARB Locker
  • Available Options:

    • Tacoma Sas Kit C, w/Detroit Locker, 1995.5, 111259-1-KIT
    • Tacoma SAS Kit C, w/ARB Locker, 1995.5, 111260-1-KIT
    • Tacoma Sas Kit C, w/Detroit Locker, 96-04, 111243-1-KIT
    • Tacoma SAS Kit C, w/ARB Locker, 96-04, 111244-1-KIT

    Note: Compressor is included in Kit C w/ARB Locker.

    Note: If you have a 3.4L engine, you may need to replace your radiator. See steps 116-120 of the instructions for more information.

    Note For SAS Kit A Only: With single case applications, a high clearance t-case crossmember is required. Rock Defense™ Tacoma Single T-Case Crossmember, 120198-1-KIT. Additional oil pan clearance may be required. See our Tacoma SAS Oil Pan Kit for more information.

    Note For SAS Kit A, B, and C: You will need the following components to complete your build:


    Learn More


    Tacoma Steering Rack
    Tacoma Steering Rack
    $418.95

    If your Tacoma steering rack is worn out, damaged or leaking we have the replacement rack you need. These high quality rebuilt units fit Toyota Tacoma 4wd Pickups from 1995 - 2004. Our rebuilt steering racks features new seals and boots. All internal parts are inspected and replaced as needed. No core charge, and no return shipping to worry about. Just one low flat rate includes; core, shipping and rebuilding. No hidden charges! Includes one year warranty against defects in labor and material.
    Learn More


    184 Item(s) Page:
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6
    7. 7
    8. 8
    9. 9
    10. 10
    11. 11
    12. 12
    13. 13
    14. 14
    15. 15
    16. 16
    17. 17
    18. 18
    19. 19
    20. Next
    Show per page