We now accept the following payment options:

184 Item(s) Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. Next
Show per page
Toyota Transfer Case Rebuild Kit (Major)
Toyota Transfer Case Rebuild Kit (Major)
$313.95

Kit contains all major gaskets, seals and bearings for Toyota gear driven transfer cases from 1979-1995. Only top quality Toyota OEM gaskets are used in this kit. Bearings include SKF, NSK, NACHI and KOYO. Kit includes most major transfer case bearings including roller bearings. Also includes flange nuts.
Learn More


Toyota Transfer Case Rebuild Kit (Minor)
Toyota Transfer Case Rebuild Kit (Minor)
$208.95

Kit contains all minor gaskets, seals, and bearings for Toyota gear driven transfer cases from 1979-1995. Only Top quality Toyota OEM gaskets are used in this kit. Bearings include SKF, NSK, NACHI and KOYO. Does not include flange nuts, or needle bearings.
Learn More


Toyota Wheel Bearing Kit
Toyota Wheel Bearing Kit
$47.25

Wheel Bearing kit includes inner and outer bearings, hub gaskets, inner wheel bearing seal and star lock washer. One kit services left or right side.
Learn More


Trail-Gear Super Metal Knuckle Stud Hardware Kit
Trail-Gear Super Metal Knuckle Stud Hardware Kit
$93.45

Stronger and longer than stock Toyota replacement knuckle studs and more affordable than our Magnum Studs these studs will provide great strength without breaking the bank. Each stud is constructed from a proprietary metal made exclusively for Trail Gear.  These studs are manufactured to our strict specifications and are significantly stronger than OEM standard (testing exceeded Class 12.9 standards). Trail Gear super metal knuckle studs are .250” (1/4”) longer than stock to accommodate all aftermarket steering arms. Like our Magnum Studs, TG super metal studs feature an integrated 8mm hex head for easy removal. These studs should be your first choice for knuckle hardware when repairing or upgrading your high-steer system.

We recommend using Locktight on the lower threads when installing knuckle studs. Studs should be tightened to 40 ft-lbs in the knuckles. Stud nuts should be tightened to 75 - 80 ft-lbs.

Fits 1979-1985 Toyota front solid axle knuckle.

Kit consist of the following:

  • Knuckle cone washers (QTY: 6)
  • Knuckle wave washers (QTY: 10)
  • Knuckle nuts (QTY: 10)
  • TG Super Metal knuckle studs (QTY: 10)

This is enough hardware to complete one six shooter knuckle
Learn More


Trail-Link Three™ Front 3-Link Kit OEM Housing
Trail-Link Three™ Front 3-Link Kit OEM Housing
$1,038.45

The Trail-Link Three™ Front 3-Link Kit is the only complete kit for Toyotas on the market today. This kit is affordable, user friendly, and strong. The link material is 2" x .250" wall DOM tubing, while the rod ends are 1.25" Creeper Joints™. All brackets are 1/4” steel, formed and welded. With 14” shocks we are getting 40” to 50” of articulation depending on the suspension in the rear of the truck. This kit has been extensively tested and has been in service for months on multiple trucks and has proven itself to be another superior Trail-Gear suspension product. Kit includes everything you need except your choice and size of shocks and upper shock mounts. Upper shock mounting location varies from vehicle to vehicle. This kit works great with our air shock hoop mounting kit. This kit may not work with high steer. Full hydraulic steering is strongly recommended. When using a Front 3-Link Kit with our Rock Assault™ Front Axle Housing , you cannot use hi-steer. Kit Includes: (2) 41", 2" OD x .250" Wall DOM links (1) 30", 2" OD x .250" Wall DOM links (1) 24.75", 1.25" OD x .250" Wall DOM Panhard link (8) Link mounting brackets (6) Creeper Joints (8) Weld in bungs (2) Rod ends (4) Misalignment spacers (4) Shock length mockup strips (2) Lower shock mounting kits
Learn More


Trail-Link Three™ Front 3-Link Kit Rock Assault™ Housing
Trail-Link Three™ Front 3-Link Kit Rock Assault™ Housing
$1,038.45

The Trail-Link Three™ Front 3-Link Kit is the only complete kit for Toyotas on the market today. This kit is affordable, user friendly, and strong. The link material is 2" x .250" wall DOM tubing, while the rod ends are 1.25" Creeper Joints™. All brackets are 1/4” steel, formed and welded. With 14” shocks we are getting 40” to 50” of articulation depending on the suspension in the rear of the truck. This kit has been extensively tested and has been in service for months on multiple trucks and has proven itself to be another superior Trail-Gear suspension product. Kit includes everything you need except your choice and size of shocks and upper shock mounts. Upper shock mounting location varies from vehicle to vehicle. This kit works great with our air shock hoop mounting kit. This kit may not work with high steer. Full hydraulic steering is strongly recommended. When using a Front 3-Link Kit with our Rock Assault™ Front Axle Housing , you cannot use hi-steer. Kit Includes: (2) 41", 2" OD x .250" Wall DOM links (1) 30", 2" OD x .250" Wall DOM links (1) 24.75", 1.25" OD x .250" Wall DOM Panhard link (8) Link mounting brackets (6) Creeper Joints (8) Weld in bungs (2) Rod ends (4) Misalignment spacers (4) Shock length mockup strips (2) Lower shock mounting kits
Learn More


Trail-Link™ Anti-Wrap Track Bar Axle Mount
Trail-Link™ Anti-Wrap Track Bar Axle Mount
$47.25

It's a fact that leaf springs can wrap-up under the torque of rock crawling. Low gears and flexible springs are more susceptible to this effect. For most trail rigs the wrap up does not present a problem. For those tackling the top trails and hardest lines, a track bar helps improve traction and responsiveness of the suspension system on the trail. Using our Formula Toy competition buggy, we have developed an anti-wrap bar that totally controls undesirable axle wrap without limiting suspension travel and articulation. The Axle bracket to the right is designed to fit tightly on 1986-1995 Toyota Pickup and 4Runner 3" style axle housings. This bracket is designed for use with Creeper Joint rod ends.
Learn More


Transfer Case Shifter Boot
Transfer Case Shifter Boot
$15.75

Genuine Toyota transfer case replacement shift boot. For use with stock shifter above. Fits 1980-1995 Toyota Pickup (All 2.4L 4-Cylinder applications) and 1983-1995 Toyota 4Runner (All 2.4L 4-Cylinder applications).
Learn More


Upper Axle Gusset
Upper Axle Gusset
$26.25

This gusset welds on top of your Toyota front solid axle and helps prevent bending of the axle housing.
Learn More


V6 Toyota Transfer Case Mount
V6 Toyota Transfer Case Mount
$144.90

Stock V6 Toyota replacement transfer case mount. This mount features a larger mounting surface than 4Cyl units. Can be used as stock replacement on 4cyl units on applications from 1982 -1995. Can be used with our crossmember above on all 1979-1995 applications.
Learn More


184 Item(s) Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. Next
Show per page