We now accept the following payment options:

184 Item(s) Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. Next
Show per page
IFS Eliminator Kit
IFS Eliminator Kit
$1,258.95

There are a lot of choices on the market for solid axle conversion. So what makes our kits stand out? We feature the highest quality parts and the most complete kit at the best price anywhere.

Our SAS kits include a front diff armor plate, upper axle gusset wheel bearing and knuckle service kits. Items most others charge extra for. To install your solid axle kit you're going to need a rear matching lift kit, solid front axle from a 79-85 Pickup or 4Runner, and a long spline drive shaft.

We offer our kits in three different heights. The hangers and shackles included with each kit add one inch of lift. Thus our 3" spring kit has 4" lift and our 4" kit would be 5" of lift.

Note: On V6 installations, we recommend moving the front hanger forward 3/4". This allows the tie rod to clear the stock 4wd oil pan. It also kicks the shackles forward slightly helping the springs to carry the heavier load of the V6 motor.

Also See: SAS Parts

SAS Kit Includes:

  • Front Leaf Springs (your choice 3" 4" or 5")
  • High Steer Crossover Steering Kit
  • Front Drop Hanger with Greasable Bolts
  • Greasable 5" Shackles
  • Frame Tubes & Jigs
  • Steering Stabilizer Kit
  • U bolt Flip Kit
  • Shock Hoops (2)
  • Bilstein Shocks (2)
  • Front Brake Lines (2)
  • Vented Rotors (2)
  • Bumpstop Extensions (2)
  • Wheel Spacers (2)
  • Bumpstops (2)
  • Front Axle Gusset
  • Axle Diff Armor
  • Knuckle Service Kit
  • Wheel Bearing Kit (2)
  • Motor Mount Cover Plates
  • Spring Pad
  • Instructions

Note: Now our front 5" springs are available in a heavy-duty version with a 25% higher spring rate. We have added a 7th leaf and readjusted the length of the leaves to match. If you are running a larger v6 or v8 motor you will appreciate the extra weight carrying capacity of these springs.

Available in the following configurations:

  • IFS Eliminator Kit, 3" Springs, 110001-1-KIT
  • IFS Eliminator Kit, 4" Springs, 110002-1-KIT
  • IFS Eliminator Kit, 5" Springs, 110003-1-KIT
  • IFS Eliminator Kit, 3" HD Springs, 110225-1-KIT
  • IFS Eliminator Kit, 4" HD Springs, 110226-1-KIT
  • IFS Eliminator Kit, 5" HD Springs, 110134-1-KIT

Available with the following upgrades:

  • 6-Stud Steering Arms (+$73.50)

*PLEASE CALL FOR A SHIPPING QUOTE*


Learn More


IFS Steering Box Mount
IFS Steering Box Mount
$49.35

If you're installing crossover steering on your 79-85 4wd Toyota you're going to need to mount an IFS steering box. This frame mount kit includes both inner and outer frame reinforcing plates, grade 8 bolts, DOM tubing, and Crimp nuts. Inner plate is 3/16", outer plate is 1/4". Angled leading and trailing edges prevent frame cracking. Heavy duty design. No questions asked, lifetime warranty.
Learn More


IFS Steering Boxes - Tapped
IFS Steering Boxes - Tapped
$376.95

Looking for a steering box for your hydro assist steering system? We now have in stock Toyota IFS steering boxes that are drilled and tapped for hydro assist steering. Two # 6 JIC fittings are installed. After tapping, each box is thoroughly flushed and fully rebuilt. 1986-1988 Style box.

If you're the type that wants to tap your own box, we have the fitting you need to do it. The fitting has a male 1/4" pipe fitting on one end and male #6 JIC fitting on the other end. Two fittings are required for each steering box conversion.

Available Parts:

  • IFS Box, Rebuilt & Tapped, 130593-1-KIT $376.95
  • Fitting, 1/4 Pipe to #6 JIC, 130263-1-KIT $4.20

Learn More


Inner Axle and Wheel Bearing Seals
Inner Axle and Wheel Bearing Seals
$6.30

When you swap out a Birfield joint it's a good idea to change the inner axle seal at the same time to keep the knuckles clean of weeping oil. Fits 79-85 Toyota solid front axle. This is a great part to keep in your tool box for trail side repairs.

Replacement wheel bearing seal. If you're repacking your wheel bearings and you don't want to purchase a full knuckle service kit, then a pair of these seals will allow you to service just the wheel bearings.

Available Parts:

  • Seal, Inner Axle, 140035-1 $6.30
  • Seal, Wheel Bearing, 140181-1-KIT $7.35

Learn More


Knuckle Stud
Knuckle Stud
$3.68

Factory Toyota knuckle hardware. Fits 1979-1985 Toyota front solid axle knuckle and a 1990-1997 Toyota FJ80 Landcruiser.
Learn More


Knuckle Stud Cone Washer
Knuckle Stud Cone Washer
$3.68

Factory Toyota knuckle hardware. Fits 1979-1985 Toyota front solid axle knuckle and a 1990-1997 Toyota FJ80 Landcruiser.
Learn More


Knuckle Stud Nut
Knuckle Stud Nut
$2.36

Factory Toyota knuckle hardware. Fits 1979-1985 Toyota front solid axle knuckle and a 1990-1997 Toyota FJ80 Landcruiser.
Learn More


Knuckle Stud Wave Washer
Knuckle Stud Wave Washer
$1.05

Factory Toyota knuckle hardware. Fits 1979-1985 Toyota front solid axle knuckle and a 1990-1997 Toyota FJ80 Landcruiser.
Learn More


Lock Hub
Lock Hub
$200.00

Factory new Toyota locking hub. Fits solid axle Toyota Pickups and 4Runners from 1979-1985.
Learn More


Lower Knuckle Caps
Lower Knuckle Caps
$61.95

These stock replacement caps fit on the bottom of 79-85 Toyota solid axle knuckles. Sold in pairs.
Learn More


184 Item(s) Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. Next
Show per page