We now accept the following payment options:

184 Item(s) Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. Next
Show per page
Rock Assault™ 3.0L V6 Power Steering Pump Kit
Rock Assault™ 3.0L V6 Power Steering Pump Kit
$481.95

We all know that the stock pump on a 3.0 is just not enough to turn big tires or run a ram assist and when you try and drill out the inlet to get more volume the result is a loud pump followed by pump failure. A new Toyota stock pump puts out around 1,300 PSI at only one gallon per minute. Our Rock Assault™ Pumps put out 1,450 and 1,650 PSI at 4-4.5 GPM, which is more than enough volume to provide you with the steering power that you will need to turn big tires or run a ram assist or full hydraulic steering system.

Trail-Gear has hand picked each component in this kit to ensure quality, ease of installation, and durability. This kit ships complete with all parts included and full color installation instructions.

Application Notes: This pump and bracket is designed to fit all Toyota V6 3.0 Pickups and 4Runners from 1989-1995. This kit does not work with 3.0 Tacoma’s. This kit will not work on 4Runners with a functioning AC, because the AC cooling fan must be removed for the placement of the PS Pump cooler. This kit does not fit Toyota V6 3.0 Pickups without AC.

Never use ATF fluid, or a semi-synthetic blend. This will void the warranty. Ok to use standard power steering fluid or a full synthetic. Royal Purple fully synthetic power steering fluid recommended.

Available Options:

  • V6 PS Pump Kit, 1,450 PSI, 130081-1-KIT $481.95
  • V6 PS Pump Kit, 1,650 PSI, 130082-1-KIT $481.95
  • V6 PS Pump Kit, Non-ABS, 1,450PSI, 130331-1-KIT $523.95
  • V6 PS Pump Kit, Non-ABS, 1,650PSI, 130332-1-KIT $523.95

Learn More


Rock Assault™ Double Ended Ram and Clevis Kits
Rock Assault™ Double Ended Ram and Clevis Kits
$355.95

Through years of research, development, and testing we at Trail-Gear have developed our double ended ram to meet the tough demands of top level rock crawling competitors and the toughest trails in the world. Based on our experience we knew exactly what we wanted in a ram, and what we didn't.

Most rams on the market only have one rod seal.  We started with the primary and secondary rod seal to insure that fluid leakage would never be an issue.  We also included two wiper seals in our design to make sure that dirt and debris stay on the trail and don't get into your steering system. In addition, we designed our ram with a Triple Lip Piston Seal for consistent steering with no drift or fluid bypassing the piston.

In true Trail-Gear style we also had to make our ram the strongest on the market, so we added a feature that you will not see on any other ram on the market.  We designed ours with a piston wear band and a rod bushing.  The bushing allows the rod to absorb much higher side loads.  We also machined our piston shaft out of a single piece of 4340 chromoly.  Other rams on the market use a two-piece welded or threaded piston shaft that can fail under severe loads.

Our Double Ended Ram and Clevis Kits have a 6", 8", or 10" stroke x 2.25" bore x 1.125” rod.  The cylinder has a black zinc-plate finish while the rod has 3/4x16 female threads on each end and is made entirely out of 4340 chromoly material.

The 6 inch ram and clevis kit has 6 total inches of travel and is perfect for Toyota's and narrowed Dana 44's.

The 8 inch ram and clevis kit has 8 total inches of travel and was made to work with Dana 44's and custom length Dana 60 applications.

The 10 inch ram and clevis kit has 10 total inches of travel and is used for buggies and comp rigs with up to 45 degree steering radius.

Kits includes:

  • (1) 6", 8", or 10" Double Ended Ram
  • (4) Cylinder Clamps
  • (2) Clevis Ends
  • (2) Clevis End Bolts
  • (2) Grade 8 Bolts
  • (4) Spacers

Available Options:

  • 6-Inch Ram and Clevis Kit, 130281-1-KIT
  • 8-Inch Ram and Clevis Kit, 130282-1-KIT
  • 10-Inch Ram and Clevis Kit, 130283-1-KIT

  • Learn More


Rock Assault™ Ram  Steering 2
Rock Assault™ Ram Steering 2" x 6"
$271.95

The Rock-Assault™ Ram Steering assist kit is the best kit you will find anywhere! Our Toyota kit features a 6" X 1.5" stroke hydraulic ram with high temp inner and outer seals for long life and no leaks. Our specially designed ram features a 3/4" rod that is 50% stronger than other 1/2" rods on the market. For Dana knuckle applications we also offer an 8" stroke version. Our specially formed, easy to install brackets make installing our kit a breeze. If you have looked at other kits on the market, you will see they either don't include mounts or they just provide generic tabs. Our mounting hardware is specially designed to fit the Toyota axle and High Steer. Once the steering box has been tapped, installation of the ram takes about one hour. Each bracket is formed from heavy-duty 1/4" plate steel for extra strength. Fits 1979 - 1995 Toyota Pickup and 4Runner with solid front axle. Ram with high temp inner and outer seals Rod ends w/jam nut Ram bracket for axle housing Ram bracket for tie rod (2) Hoses (2) JIC 90 degree elbows (2) 1/4" NPT x #6 JIC steering box fittings Mounting Hardware Instructions w/photos Kit requires: High Steer crossover steering with 1.25" tie rod Tapped steering box (Trail-Gear Kit 130593-1-KIT recommended.)
Learn More


Rock Assault™ Ram Steering 1.5
Rock Assault™ Ram Steering 1.5" x 6"
$250.95

The Rock-Assault™ Ram Steering assist kit is the best kit you will find anywhere! Our Toyota kit features a 6" X 1.5" stroke hydraulic ram with high temp inner and outer seals for long life and no leaks. Our specially designed ram features a 3/4" rod that is 50% stronger than other 1/2" rods on the market. For Dana knuckle applications we also offer an 8" stroke version. Our specially formed, easy to install brackets make installing our kit a breeze. If you have looked at other kits on the market, you will see they either don't include mounts or they just provide generic tabs. Our mounting hardware is specially designed to fit the Toyota axle and High Steer. Once the steering box has been tapped, installation of the ram takes about one hour. Each bracket is formed from heavy-duty 1/4" plate steel for extra strength. Fits 1979 - 1995 Toyota Pickup and 4Runner with solid front axle. Ram with high temp inner and outer seals Rod ends w/jam nut Ram bracket for axle housing Ram bracket for tie rod (2) Hoses (2) JIC 90 degree elbows (2) 1/4" NPT x #6 JIC steering box fittings Mounting Hardware Instructions w/photos Kit requires: High Steer crossover steering with 1.25" tie rod Tapped steering box (Trail-Gear Kit 130593-1-KIT recommended.)
Learn More


Rock Assault™ Ram Steering 1.5
Rock Assault™ Ram Steering 1.5" X 6" TG, For Rock Assault™ Housing
$261.45

The Rock-Assault™ Ram Steering assist kit is the best kit you will find anywhere! Our Toyota kit features a 6" X 1.5" stroke hydraulic ram with high temp inner and outer seals for long life and no leaks. Our specially designed ram features a 3/4" rod that is 50% stronger than other 1/2" rods on the market. For Dana knuckle applications we also offer an 8" stroke version. Our specially formed, easy to install brackets make installing our kit a breeze. If you have looked at other kits on the market, you will see they either don't include mounts or they just provide generic tabs. Our mounting hardware is specially designed to fit the Toyota axle and High Steer. Once the steering box has been tapped, installation of the ram takes about one hour. Each bracket is formed from heavy-duty 1/4" plate steel for extra strength. Fits 1979 - 1995 Toyota Pickup and 4Runner with solid front axle. Ram with high temp inner and outer seals Rod ends w/jam nut Ram bracket for axle housing Ram bracket for tie rod (2) Hoses (2) JIC 90 degree elbows (2) 1/4" NPT x #6 JIC steering box fittings Mounting Hardware Instructions w/photos Kit requires: High Steer crossover steering with 1.25" tie rod Tapped steering box (Trail-Gear Kit 130593-1-KIT recommended.)
Learn More


Rock Assault™ Ram Steering 2
Rock Assault™ Ram Steering 2" X 6" TG, For Rock Assault™ Housing
$282.95

The Rock-Assault™ Ram Steering assist kit is the best kit you will find anywhere! Our Toyota kit features a 6" X 1.5" stroke hydraulic ram with high temp inner and outer seals for long life and no leaks. Our specially designed ram features a 3/4" rod that is 50% stronger than other 1/2" rods on the market. For Dana knuckle applications we also offer an 8" stroke version. Our specially formed, easy to install brackets make installing our kit a breeze. If you have looked at other kits on the market, you will see they either don't include mounts or they just provide generic tabs. Our mounting hardware is specially designed to fit the Toyota axle and High Steer. Once the steering box has been tapped, installation of the ram takes about one hour. Each bracket is formed from heavy-duty 1/4" plate steel for extra strength. Fits 1979 - 1995 Toyota Pickup and 4Runner with solid front axle. Ram with high temp inner and outer seals Rod ends w/jam nut Ram bracket for axle housing Ram bracket for tie rod (2) Hoses (2) JIC 90 degree elbows (2) 1/4" NPT x #6 JIC steering box fittings Mounting Hardware Instructions w/photos Kit requires: High Steer crossover steering with 1.25" tie rod Tapped steering box (Trail-Gear Kit 130593-1-KIT recommended.)
Learn More


Rock Assault™ Ram Steering 2
Rock Assault™ Ram Steering 2" x 8"
$271.95

The Rock-Assault™ Ram Steering assist kit is the best kit you will find anywhere! Our Toyota kit features a 6" X 1.5" stroke hydraulic ram with high temp inner and outer seals for long life and no leaks. Our specially designed ram features a 3/4" rod that is 50% stronger than other 1/2" rods on the market. For Dana knuckle applications we also offer an 8" stroke version. Our specially formed, easy to install brackets make installing our kit a breeze. If you have looked at other kits on the market, you will see they either don't include mounts or they just provide generic tabs. Our mounting hardware is specially designed to fit the Toyota axle and High Steer. Once the steering box has been tapped, installation of the ram takes about one hour. Each bracket is formed from heavy-duty 1/4" plate steel for extra strength. Fits 1979 - 1995 Toyota Pickup and 4Runner with solid front axle. Ram with high temp inner and outer seals Rod ends w/jam nut Ram bracket for axle housing Ram bracket for tie rod (2) Hoses (2) JIC 90 degree elbows (2) 1/4" NPT x #6 JIC steering box fittings Mounting Hardware Instructions w/photos Kit requires: High Steer crossover steering with 1.25" tie rod Tapped steering box (Trail-Gear Kit 130593-1-KIT recommended.)
Learn More


Rock Assault™ Ram Steering 2
Rock Assault™ Ram Steering 2" X 8" TG, For Rock Assault™ Housing
$282.95

The Rock-Assault™ Ram Steering assist kit is the best kit you will find anywhere! Our Toyota kit features a 6" X 1.5" stroke hydraulic ram with high temp inner and outer seals for long life and no leaks. Our specially designed ram features a 3/4" rod that is 50% stronger than other 1/2" rods on the market. For Dana knuckle applications we also offer an 8" stroke version. Our specially formed, easy to install brackets make installing our kit a breeze. If you have looked at other kits on the market, you will see they either don't include mounts or they just provide generic tabs. Our mounting hardware is specially designed to fit the Toyota axle and High Steer. Once the steering box has been tapped, installation of the ram takes about one hour. Each bracket is formed from heavy-duty 1/4" plate steel for extra strength. Fits 1979 - 1995 Toyota Pickup and 4Runner with solid front axle. Ram with high temp inner and outer seals Rod ends w/jam nut Ram bracket for axle housing Ram bracket for tie rod (2) Hoses (2) JIC 90 degree elbows (2) 1/4" NPT x #6 JIC steering box fittings Mounting Hardware Instructions w/photos Kit requires: High Steer crossover steering with 1.25" tie rod Tapped steering box (Trail-Gear Kit 130593-1-KIT recommended.)
Learn More


Rock Assault™ Trunnion Bearing Eliminator Kit
Rock Assault™ Trunnion Bearing Eliminator Kit
$261.45

Anyone who wheels hard, rock crawls, or rock races has experienced blown up trunnion bearings, no matter what size bearings they are using, the bearing is always the point of failure. The Rock Assault™ Trunnion Bearing Eliminator Kit totally eliminates the bearings and replaces it with a solid king pin style pin that sits in a hardened bushing. The pin and bushing are made out of a material that is considered bearing quality because of its high carbon content, which gives it extreme hardness. To make sure these pins provide you with smooth steering we have added zerk grease fittings and machined the pins with grease passages and grooves so that they can easily be lubricated without any disassembly of the steering knuckle. The Rock Assault™ Trunnion Bearing Eliminator Kit can be installed in a matter of hours and does not require you sending us your steering arms to be machined. You simply press out the pins in your 4 or 6 stud steering arms and press in the provided Trunnion Bearing Eliminator pins. The bottom pins have been preinstalled in the bottom caps and simply drop in after the lower bushings have been installed. Since you will need to disassemble your knuckle assembly to complete this install a full knuckle service kit is provided so that you can replace all seals, gaskets, and shims. Note: Due to various machining tolerances in the current steering arms on the market, some slight reaming may be required. This kit will not work with stock Toyota steering. Kit includes: (4) Steering pins (4) Steering pin bushings (4) Zerk grease fittings (2) Trunnion bearing cap (1) Knuckle service kit
Learn More


Rock Assualt Front Axle Housing
Rock Assualt Front Axle Housing
$700.00

Trail-Gear is proud to introduce the newest addition to the Rock Assault™ Axle Housing family, our Rock Assault™ Front Axle Housing. This exclusive axle design is the first in the industry to be released with all new parts. That's right, our axle housing is not made with 30-year-old used knuckle balls. Our knuckle balls are forged from 1035 steel, making them much stronger than stock, eliminating closed or bent knuckle balls. The axle tubes have been offset above the housing centerline, so the inner axles ride near the bottom of the axle tubes rather than in the center. The result is an increase of 3/8" in ground clearance under the axle tubes. The axle tubes are made from 5/16" thick 1020 DOM tubing with an outer diameter of 3". The short side of the axle tube has been lengthened by 3", making the axle IFS width, so there is no need to run wheel spacers. A 27 or 30 spline short side chromoly axle shaft will be supplied with the axle housing. The heavy-duty, press formed, 1/4" plate steel center section is shaved to give you 3/4" of additional ground clearance under the differential. The differential mounting surface is made from 1/2" plate steel to ensure studs can not pull out, even under heavy loads. Our housings are precision alignment checked using start-of-the-art, 3D digital imaging equipment to ensure that all Rock Assault™ Axle Housings are 100% straight and true. The Rock Assault™ Front Axle Housing will come in your choice of bare tubes, with spring perches installed, or 3-link ready with a panhard bracket included. For an additional charge we can install an inspection cap making inspecting your front ring and pinion a breeze. Axle housing is shipped unpainted and lightly oiled to prevent rust during shipping and storage.
Learn More


184 Item(s) Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. Next
Show per page